Lawn Devil DB8605 User Manual - page 10
10
Fill the tank outdoors when the engine is cold. Wipe up spills.
Do not handle gasoline when smoking or around an open flame or sparks.
Store gasoline in an approved fuel container, out of the reach of children.
Please refer to Engine Manual for more details.
Adjusting the Cutting Height
Warning: Adjusting the cutting height may bring you into contact with the moving
blade, causing serious injury.
Move the height adjustment forward to lower the height, back to raise the cutting height.
(Figure 8)
Starting the Engine
Before starting the engine, adjust the engine speed lever to the upper start position
n in Figure 9.
Hold on the Upper handle and Blade-control Bar tightly with your right hand, pull the
Recoil-start Grip lightly until you meet
then pull briskly. Release the
starter
Adjust the Engine Speed Lever to suitable speed for mowing. (Figure 11)
(Figure 9) (Figure 10) (Figure 11)
Fast
speed
Slow
speed
Adjust the height with the engine off.
as show
ressistance,
after the engine starts, as shown in figure 10.
grip gently