1. DL manuals
  2. Lawnbott
  3. Lawn Mower
  4. LB85EL
  5. User Manual

Lawnbott LB85EL User Manual

Manual is about: Robotic mower

Summary of LB85EL

  • Page 1

    1 user’s manual en table of contents general information. ................................................................................................................................................................... 2 introduction. .................................................................

  • Page 2

    2 user’s manual en general information introduction congratulations on purchasing this product, which we are certain will meet your needs and expectations. This project was created by zucchetti centro sistemi s.P.A. (uni en iso 9001 certified company), a software house that since 1982 has consolidat...

  • Page 3

    3 user’s manual en identification of manufacturer and equipment the nameplate shown here is applied directly onto the appliance. It contains references and all the information essential for safely operating the device. For any technical requirements, please contact the manufacturer’s technical servi...

  • Page 4

    4 user’s manual en • before releasing or doing any maintenance and adjustments that can also be done by the user with a minimum of technical skills, please disconnect power and activate the safety device. However, the user must take all necessary safety precautions, in particular when working on the...

  • Page 5

    5 user’s manual en safety signals read user instructions carefully to understand meanings before using the machine. Stop do not touch the rotary blade and do not place your hands or feet underneath the machine when it is running. Wait until the blade and rotating parts come to a complete stop before...

  • Page 6

    6 user’s manual en technical information technical specifications description model 075de2 075ev2 075ev21 075el2 maximum recommended surface that can be mowed robot (*) m 2 (sq ' ) 600 ( 6460 ) 1200 ( 12912 ) 1600 ( 17216 ) 2200 ( 23672 ) features dimensions (w x h x d) mm 593x298x439 robot weight (...

  • Page 7

    7 user’s manual en maximum length of perimeter wire (approximate, calculated based on a regular perimeter) m ( ' ) 600 (1968 ' ) fastening pegs no. 100 200 areas managed, including the primary one 3 4 tx-s1 perimeter signal (patented) standard rain sensor standard blade modulation and intelligent sp...

  • Page 8

    8 user’s manual en main parts / standard equipment 1. Robot. 2. Keyboard commands: for setting and displaying the operating modes of the robot. 3. Rain sensor: detects rain and commands the robot to return to the charging station. 4. Battery: the robot is supplied with one or more lithium batteries ...

  • Page 9

    9 user’s manual en installation packing and unpacking the equipment is delivered suitably packaged. When unpacking, carefully remove and check the integrity of the parts. Warning – caution keep plastic wrapping and plastic containers away from infants and children: risk of suffocation! Important kee...

  • Page 10

    10 user’s manual en • the charging station is connected to the power supply unit via a cord that must move away from the charging station on the outside of the cutting area. • position the power supply unit according to these rules: - in a well-ventilated area protected against atmospheric agents an...

  • Page 11

    11 user’s manual en setting up of the perimeter wire before installing the perimeter wire, it is necessary to check the entire surface of the lawn. Make any necessary adjustments to the grassy surface during the laying of the perimeter wire in order to allow the robot to function correctly. 1. Evalu...

  • Page 12

    12 user’s manual en setup of the robot’s quick re-entry to the charging station quick re-entry requires a special installation of the perimeter wire that allows the robot to reduce the re-entry path to the charging station. This special installation of the perimeter wire should only be used for gard...

  • Page 13

    13 user’s manual en preparation and marking the boundaries of the work areas preparation of the lawn to be mowed 1. Make sure the lawn to be mowed is even and does not contain holes, stones or other obstacles. If necessary, prepare the lawn by filling in any holes and removing any obstacles. If some...

  • Page 14

    14 user’s manual en marking the boundary of the work area 3. Check the entire lawn surface and assess whether it is necessary to divide it into separate work areas as per the rules described here below. Before installing the perimeter wire, check the entire path to make this procedure easier. The il...

  • Page 15

    15 user’s manual en 4. If there is a pavement or driveway inside or outside the work area, which is at the same level of the lawn, lay the perimeter wire at a distance of 5 cm (1.96 ") from the edge of the pavement. The robot will come out slightly from the lawn and all the grass will be mowed. If t...

  • Page 16

    16 user’s manual en if there is a pool, pond, ravine, ditch, steps or public roads not protected by a wall inside or outside the work area, lay the perimeter wire at least 90 cm (35.43 ") from the edge. To reduce the distance of the perimeter wire for the best set-up and operation of the robot, we r...

  • Page 17

    17 user’s manual en installation of perimeter wire the perimeter wire can be buried or laid on the ground. If you have a wire trenching machine, it is better to bury the wire for greater protection. Otherwise, install the wire on the ground with the pegs provided as described below. Important start ...

  • Page 18

    18 user’s manual en joining of the perimeter wire important a buried wire or a wire laid on the ground can be joined to other wires having the same characteristics (see figure). When joining the two wires, make sure to use self-sticking tape (for example, 3m scotch 23). Do not use insulating tape or...

  • Page 19

    19 user’s manual en 6. Fasten the charging station (n) to the ground with the pegs (p). If necessary, secure the charging station with screw anchors (q). Pegs (p) screw anchors (q) charging station (n) 7. Connect the power cord (e) of the charging station (n) to the power supply unit (a). 8. Connect...

  • Page 20

    20 user’s manual en adjustments adjustment recommendations important the user must make any adjustments according to the procedures described in this manual. Do not make any adjustments which are not expressly indicated in this manual. Any special adjustments, not expressly indicated in this manual,...

  • Page 21

    21 user’s manual en use and operation obligations for use important - when using the robot for the first time, please read the manual carefully and make sure you have understood it completely; in particular, all the information on safety. - the product must only be used for its intended purpose as d...

  • Page 22

    22 user’s manual en navigation follow these instructions to navigate through the programming menu: - “+” and “-”: allows scrolling through the menu items in a cyclical manner or changing the value of the function displayed. - “enter”: moves to the next menu level or confirms and memorises the value ...

  • Page 23

    23 user’s manual en secondary areas second. Area 1 second. Area 3 (*) determines the setting for a possible secondary area 1 indicating the size of the area, the distance from the charging station and the direction to reach it determines the setting for a possible secondary area 3 percentage distanc...

  • Page 24

    24 user’s manual en settings – programming mode alarm: (only for some versions, see “technical specifications") function for enabling or disabling the antitheft alarm. The password is required to disable the alarm (default 0000). • disable: disables or turns off the alarm if it is on. A continuous a...

  • Page 25

    25 user’s manual en work schedules – programming mode week: function for programming the operating days of the robot during the week. The cursor automatically positions itself under the letter “m” (monday). Setting all the days at “1111111” means that the robot will work every day. Setting “0000000”...

  • Page 26

    26 user’s manual en secondary areas – programming mode if the area to be mowed includes secondary areas based on the definition given in the chapter “preparation and marking the boundaries of the work areas”, then it is necessary to program the secondary areas so the robot knows how to reach them an...

  • Page 27

    27 user’s manual en important to set or change the password, it is first necessary to enter the previous one and then enter the new one. Upon purchase, the password entered by the manufacturer consists of four numbers (0000). Important when entering the password, you will be prompted to re-enter the...

  • Page 28

    28 user’s manual en robot safety stop during use, it may be necessary to stop the robot. In normal conditions, the robot can be stopped with the “off” key. In case of danger or when performing any maintenance, it is necessary to stop the robot in safe conditions in order to prevent the blade from ac...

  • Page 29

    29 user’s manual en 1. Press the “on” key. 2. Enter the password (if prompted) (see “password entry”). 3. The “pause” function appears on the display. Enter pause 4. Enter into programming mode and select “operating mode”. Select “closed area” and the words “closed area – 60 min” (default value) wil...

  • Page 30

    30 user’s manual en password entry the robot can be protected by a password consisting of four numbers which can be enabled, disabled and personalised by the user (see “programming mode”). 1. On the display appears the message: 2. Press either the “+” or “-” key to set the first number. 3. Press “en...

  • Page 31

    31 user’s manual en restarting before restarting the robot after a long period of inactivity, proceed as follows: 1. Connect the plug of the power supply unit (a) to the electrical outlet. 2. Reconnect the main electrical power supply. 3. Position the robot inside the charging station. 4. Press the ...

  • Page 32

    32 user’s manual en operating tips below are some useful operating tips to follow when using the robot. - even after being suitably informed on the use of the robot, it is always a good idea to simulate some test manoeuvres on first use to identify the commands and main functions. - check and secure...

  • Page 33

    33 user’s manual en robot cleaning 1. Stop the robot safely (see “robot safety stop”). The red led light on the panel must be on. Warning – caution use protective gloves to prevent cutting your hands. 2. Clean all the outside surfaces of the robot with a sponge soaked in warm water and a mild deterg...

  • Page 34

    34 user’s manual en troubleshooting troubleshooting guide the information below is designed to help identify and correct any faults and/or malfunctions which may occur during operation. Some faults can be fixed by the user, while others require specific technical skills or special expertise and ther...

  • Page 35

    35 user’s manual en problem cause remedies the work area is not completely mowed not enough work hours extend the working time (see “programming mode”) cutting blade clogged with deposits and/or residuals stop the robot safely (see “robot safety stop”) warning – caution use protective gloves to prev...

  • Page 36

    36 user’s manual en problem cause remedies “wheel error” appears on the display ground is uneven or contains obstacles that prevent movement make sure the lawn to be mowed is even and does not contain holes, stones or other obstacles. Otherwise, fill in any holes and remove any obstacles (see “prepa...

  • Page 37

    37 user’s manual en part replacement recommendations for replacing parts important replace and repair any parts according to the manufacturer’s instructions, or contact the service centre if these operations are not included in the manual. Battery replacement important replace the batteries at an au...

  • Page 38

    38 user’s manual en robot disposal • at the end of its useful lifespan, this product is classified as weee (waste electrical and electronic equipment). It must therefore not be disposed of as normal domestic waste, as mixed urban waste (undifferentiated) or as separated urban waste (differentiated)....

  • Page 39

    39 user’s manual en ec declaration of conformity zucchetti centro sistemi s.P.A. Via lungarno 305/a terranuova b.Ni (ar) italy zucchetti centro sistemi s.P.A. Declares and assumes liability that the product: battery-powered automatic lawnmower robot, model 075de2, 075ev2, 075ev21, 075el2, complies w...

  • Page 40

    40 user’s manual en.