Designed to be comfortable, and built to stay that way. Manager chair assembly instructions model number: 45418 itm./art. 172586 alistair.
Casters quantity: 5 chair assembly instructions carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. Note: the casters sold with this chair are intended for use on carpet and ...
3 b a b c step 1 place the star base (b) upside down and insert 5 casters (a) into the holes on the star base (b). Step 2 turn the star base (b) over and insert the gas lift with telescoping cover (c) through the center hole on top of star base (b)..
4 e f g g h step 3 attach the back cushion (f) to the bottom of the seat cushion (e) by using 1“ screws (g) in the bracket holes and tighten the screws. *note : tighten the screws completely..
5 h g g e step 4 attach seat plate (d) to the bottom of the seat cushion (e) (with the front of the seat plate facing the front of seat cushion). Attach by using 1” screws (g) for the holes of the seat plate (d) and tighten the screws. *note : tighten the screws completely. D.
6 step 5 position the assembled chair upright with the seat plate facing down. Insert the gas lift with telescoping cover (c) into the center hole of the seat plate (d). E d c.
7 operating instructions function instruction - 1 to adjust seat height : while seated, lean forward and reach under the right side of the chair to locate the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. To lower the seat, lift the handle ...
8 function instruction - 2 to operate tilt lockout : while seated, reach under the left side of the chair to find the lockout bar. Slide the bar to the left (toward the outside of the chair), all the way out, to allow the chair to tilt backwards. To lock the chair in the vertical position, sit uprig...
9 function instruction - 3 to adjust tension on the tilt : reach under the front center of the chair, grasp the round knob (r) and turn it counter- clockwise to stiffen the tilt mechanism for a heavier user. Turn the knob (r) clockwise to loosen the tilt mechanism for a lighter user. Rotate the knob...
10 limited warranty true innovations seating products are warranted against defects in material and workmanship while owned by the “original purchaser”. The term “original purchaser” is defined as that party or entity which purchases true innovations furniture from an authorized true innovations ret...
La-z-boy is a trademark of la-z-boy incorporated and is used under license to lf products pte ltd..
