LAZER TARDIZ User Manual
1/
Overview parts & pieces
2/
Location of the sensor on the helmet
TARDIZ
WASP AIR
Thank you for purchasing the Inclination Sensor
from Lazer.
Lazer Inclination Sensor is a body posture
monitor that allows you to track your
aerodynamic cycling posture in real time. The
monitor tracks your head position and gives you,
while riding, a tactile or acoustic feedback when
you are out of your optimal aerodynamic position.
The monitor is calibrated towards your optimal
aerodynamic cycling position. To do so, you
are encouraged to visit a wind tunnel. If you
cannot visit a wind tunnel, a training centre
may also have a good idea on how you should
be positioned on a bicycle to have an optimal
aerodynamic cycling posture.
The monitor aims at making you aware of your
head position while riding.
calibration button
Inclination Sensor
Inclination Sensor holder
usb connector
LEDs
USB cable
on/off button
The Inclination Sensor is located on the rear of a helmet,
as you can see in the figure below.
3/
How to fix the sensor onto the helmet
During first use, you attach the Inclination Sensor holder
on the predefined location of your helmet with the use of
a snap if your helmet is Inclination Sensor compatible.
If your helmet is not yet Inclination Sensor compatible
you may use a velcro with a double sided tape.
inclination sensor
owner’s manual /
ENG