1. DL manuals
  2. LB-Link
  3. Wireless Router
  4. BL-WR3000
  5. Quick Installation Manual

LB-Link BL-WR3000 Quick Installation Manual

Manual is about: 300Mbps wireless N router

Summary of BL-WR3000

  • Page 1

    300mbps wireless n router model:bl-wr3000 quick installation guide.

  • Page 2: 1.Connecting The Device

    1.Connecting the device note: please use wired network connections only to configure the router. Connect the wan port on your router to the modem's lan port with an ethernet cable. （if there is no modem, please use the incoming cable directly into the router's wan port）. Connect your computer to the...

  • Page 3

    Check the router's led indicator lights display status is the same as described. Note: if the led indicator light display abnormal, please check whether the connection is correct. 4 wan:flashing or solid light lan:flashing or solid light if the corresponding port is connected sys flashing : power: s...

  • Page 4: 2.Configuring The Device

    2.Configuring the device note: first of all, please configure your computer's ip address to automatically obtain, if not clear, please refer to faq3. Login open your web browser,input 192.168.16.1 in the address field and press enter. A dialog box will prompt you for the user name and password. Ente...

  • Page 5

    2 internet paremeters configuration this page will then display how to select a connection type? User name and password a static ip address, subnet mask, gateway and dns server static ip address the internet parameters provided by isp when users apply for internet access no parameters, don't use any...

  • Page 6

    Wireless settings configuration this page will then display note: the basic setting for your router is completed. You will be able to access to the internet, if not, please refer to the troubleshooting 3 network wireless firewall virtual server qos quick setup quick setup qucik setup network name(ss...

  • Page 7: 3.Troubleshooting

    3.Troubleshooting faq1: what should i do if i forget the user name and password? (how to restore the router 's configuration to its factory default settings.) answer: if you forget the user name and password, the only way to solve this problem is to reset the router. Press and hold the reset button ...

  • Page 8

    Click network connections right-click local area connection click properties 7 double-click internet protocol (tcp/ip) for windows xp os.

  • Page 9

    Select obtain an ip address automatically select obtain dns server address automatically click ok 8 click ok for windows xp os.

  • Page 10

    Click view network status and tasks click properties right-click local area connection go to start > control panel, you will then see the following page. For windows 7 os 9 click change adapter settings.

  • Page 11

    Double-click internet protocol version 4 (tcp/ipv4) select obtain an ip address automatically select obtain dns server address automatically click ok 10 for windows 7 os click ok.

  • Page 12

    Click ok for windows 7 os 11.

  • Page 13

    Press the keyboard win( )+x to popup the menu on the win8 desktop, then select control panel click view network status and tasks click change adapter settings for windows 8 os 12.

  • Page 14

    Double-click internet protocol version4(tcp/ipv4) click properties right-click ethernet for windows 8 os 13.

  • Page 15

    Select obtain an ip address automatically select obtain dns server address automatically click ok click ok for windows 8 os 14.

  • Page 16

    Is the registered trademark of shenzhen bilian electronic co ,ltd.All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders 2012 all rights reserved. . Ver 1.0 http://www.Lefen.Com.