LCG Mini Party Mix LCG-305A User Manual - - - 4 - -
Led effect light user manual
- - 4 - -
1. Safety instruction
Once after received this product , please take and put carefully. And check cautiously that whether
the product was damaged or not during the transportation, if yes, please not use this fixture and
contact local dealers or manufacturers as soon as possible.
The applicable temperature for the lighting is below 40°C. Do not use the lighting above the
temperature.ta=40
℃
The fixture applicable widely, it must keeping clean, Please do not in overheat or dusty
environment use the device. Do not touching Chemical liquid.
Should be paid attention to the use of this product: fire, heat, electric shock, loss caused by severe
or fatal injury, in electricity or to read the instructions before installation, follow the safety instruction
and pay attention to the manual and warning signs on the equipment, if you have any other
questions about how safe operating equipment, please contact the dealer or manufacturer as soon
as possible.
According to the procedures described in this operating instructions, please do not open by
yourself. Any break, please contact professionals, and must by the professional and technical
personnel for repair.
Do not power in and open before installation. Let have a rest when continuous work for eight hours.
It will longer the device using lift.
Fixed installation, to prevent the strong vibration or impact of the device.
The distance between the device and the projectile to keep at least 0.5 meter.
Never look directly into the light source,as sensitive persons may suffer an epileptic
shock(especially meant for epileptics)!
When light output position of the device of dustproof glass breakage, cracks or other visible
damage, user should replace the new glass to continue to use.
2. Installation
When install this equipment please make sure there's no flammable surfaces (decorated things,
etc) and minimum distance of 0.5M from the equipment to the flammable.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the
weight and without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.Never stand directly below the device when mounting, removing or servicing the
fixture.
3. Product Specification
Input voltage: DC12V
Fuse: BGDP
¢
5*20mm 250VAC T2A
Power load: 220V 20W
Power consumption: 220V 25W
Power cable mode: DC single input
LED: 4*3W (R1/G1/B1/W1), 32*0.2W RGB 3in1
Laser: 100mw/650nm+30mw/532nm
Control mode: sound/auto
Max working Temp: 40
℃
Housing max ambient Temp
:
65
℃
Net weight
:
1.6Kg; Gross weight: 2.3Kg
Product size:159 X 248 X 210mm