LCN LCN-MRS Installation Manual - Installation Guide
Installation guide
Local Control Network
6
LCN-MRS
®
Putting into operation
Requirements: The
and can be parameterized over the menu for the I-Port. You will find the LCN-MRS
configuration under Ports > I-port > LCN-MRS.
The firmware in the LCN-GT4D/-GT10D must have at least version 6.x to be able
to show the dynamic text.
Settings: The following points should be preset
LCN-MRS will be recognized as a module with an LCN-PRO version 5
Note:
Please be aware, that a larges amount of telegrams could be sent when switching
over the sources, especially when more than one output channel is located in a
synchronized group. To avoid losing status messages, it is recommended to lock
the keys during the time that the status messages are being sent.
: Name of the inputs & outputs, equalizer,
maximal volume of the outputs and the synchronized groups.
Internet radio
To change the channels in the internet radio, you must enter the IP address of the LCN-
MRS into the address line of the web browser (e.g. Firefox). The website of the internet
radio will then open. Now a channel can be erased or added. To do this, you must copy the
link of the livestream into the domain “Add”. Further information can be found in the
operating manual of the LCN-MRS.