LD CURV 500 IAMP User Manual - page 10
10
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
TECHNICAL DATA
Model number:
LDCURV500IAMP
Product type:
DSP controlled amplifier
Type:
4-Channel
Rated output power (1 kHz @ 2,7 Ohm):
4 x 240 W (depending on preset)
Rated output power (1 kHz @ 4 Ohm):
4 x 240 W (depending on preset)
Rated output power (1 kHz @ 8 Ohm):
4 x 120 W (depending on preset)
Rated output power (1 kHz @ 16 Ohm):
4 x 60 W (depending on preset)
Output circuitry:
Class D
Frequency response +/- 1dB:
10 Hz - 22000 Hz (depending on preset)
THD:
Protection circuits:
Over-current, soft-start, DC, thermal overload, short circuit, Multiband limiter
Controls:
Push-Turn-Control
Indicators:
OLED Display
AD/DA converter sampling frequency:
48 kHz
AD/DA converter resolution:
24 Bit
Dynamic range:
114 dB
Maximum delay / Channel:
59 m/ 166 ms
Equalizer:
10x Parametric / Channel
Line inputs:
4
Line input connectors:
XLR (symmetrical), screw-/plug-in-terminals
Loudspeaker outputs:
4
Speaker output connections:
Speakon compatible, screw-/plug-in-terminals
Ground Lift:
Yes, GUI integrated
Cooling:
temperature controlled low-noise fan, noiseless in idle mode
Operating voltage:
Switching power supply, 115 V AC / 230 V AC, 50/60Hz (automatic conversion)
Fuse:
110 - 120V AC: T10AL / 250V
220 - 240V AC: T5AL / 250V
Power consumption @ full load:
1100 W
Ambient temperature (in operation):
0°C - 35°C
Relative humidity (in operation):
Width:
482 mm
Height:
44 mm
Depth:
420 mm
Weight:
6,8 kg
Features:
4-channel DSP controlled, Purpose-designed for CURV500 installations, Smart 19“/ 1U
housing, Each channel can drive up to six CURV500 satellites or one CURV500ISUB subwoofer,
Single push encoder operation, High contrast OLED display, Temperature controlled low-noise
fan, High efficiency switch mode power supply (PFC)
EXIT
To exit the selection menu and show the main display, turn the MENU dial to EXIT (light background) and confirm by pressing the MENU dial.