LD LDEB15HP User Manual - page 7

Back paNEl / controL ELEmEntS:

1

INpuT

Both 4-pole Speakon sockets are parallel wired and can be used for both operating modes, Fullrange and 

Biamping mode.

If one socket is used as Input, the other socket can be used as Link Output.

For Fullrange mode (operating mode switch

2

in position FULLRANGE) only pin 1+ and 1- of the SPEAKON 

sockets are used. Frequency separation for high and low frequencies will be done by the internal passive 

crossover.

For Biamping mode (operating mode switch in

2

position BIAMPING) pin 1+ and 1- of the Speakon sockets 

are used for low frequencies (woofer) and pin 2+ and 2- are used for high frequencies (tweeter). Frequency 

separation has to be done by an active crossover (LDDS21 or LDDPA260) before amplification (recommended 

crossover frequency 1000Hz).

2

opERaTING ModE SWITcH

For Fullrange mode set to FULLRANGE.

For Biamping mode set to BIAMPING.

IT

ALIANO

POLSKI

ESP

Añ

OL

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

DEUTSCH

ENGLISH

7