LD LDXS200 User Manual - page 2

Introduction

With the largest model measuring just 1U and weighting just 3.4, the LD Systems XS power amplifiers are 

absolute flyweights. Our Class D power amplifier technology makes it possible to pack high performance into a 

minimum of space without generating unnecessary loss energy. The power amplifiers have outputs of 100W to 

350W per channel at 4 ohms and 200w to 700W in bridged mode. It is conceived for all professional applications 

in which ease of transport and space is essential, whether mobile or in permanent installations.

The XS power amplifiers are equipped with all protection circuits against short-circuiting, DC, overheating, and 

overloading and have a soft-start delay.

All inputs have XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as 

outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and 

ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the 

mode of operation. The XS power amplifiers impress with operational dependability and a transmission range of 

20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity. 

2

ENGLISH

DEUTSCH

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

FRANCAIS

ES

pA

ño

L

po

LSKI

IT

ALIAN

o

You‘ve made the right choice!

We have designed this product to operate reliably over many years. LD Systems stands for this with its name and 

many years of experience as a manufacturer of high-quality audio products.

Please read this User‘s Manual carefully, so that you can begin making optimum use of your LD Systems product 

quickly.

You can find more information about LD SYSTEMS at our Internet site  WWW.

LD-SYSTEMS

.COM