LD MEI1000 User Manual - page 10
10
SYSTEM SETUP:
BODYPACK SETUP:
Full Display:
Displays battery status, RF/audio level, stereo/mono working
mode, EQ mode,locking status, limiter function and working
frequency, as shown in diagram
1
.
Left and Right Audio track Adjusting:
Press or to adjust left and right audio track balancing, as
shown in diagram
2
. Please see the chapter “THE FOCUS MODE“
for further information.
Select a Group and Channel:
Repeatedly press “SET” button, until “GROUP” appears and
flashes. Press or to select suitable frequency group number,
as shown in diagram
3
on the left. Press “ SET” again until
“CHANNEL” flashes. Press or to select a suitable channel, as
shown in diagram
4
on the left.
Equalization setup:
Repeatedly press the “SET” button until “EQ” flashes. Press or
to select the EQ working mode, Hight Boost (Offers more high-
end response: 6 dB boost at 10 kHz), Normal (Flat), as shown in
diagram
5
.
Limiter selection:
Repeatedly press the “SET” button until “LIMITER” flashes and
press or to select the Limiter function, as shown in diagram
6
.
Locking selection:
Repeatedly press the “SET” button until “LOCK SELECT ” flas-
hes. Press or to lock or unlock, as shown in diagram
7
.
When “LOCK SELECT” is activated settings in the transmitter can
be viewed but not changed.
Battery Indication:
The battery level is indicated in 4 stages
8
.
8
5
6
7
1
2
3
4
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI