LD ROADMAN 102 User Manual - System
13
ENGLISH
DEUTSCH
FRANCAIS
SYSteM
SettInGS AnD oPeRAtIonS:
6
SWITCHED OUT
Use this Output to plug a further passive speaker.
When using this output the speaker of the Roadman
102 is automatically muted and the sound only
comes out of the passive speaker.
7
UNSWITCHED OUT
Use this Output to plug a further passive speaker.
When using this output the sound comes out of both
the Roadman and the passive speaker.
8
LINK OUTPUT
This output allows you to connect the Roadman to
another Roadman.
9
LINK SET
MASTER / SLAVE: When connecting several
Roadman together (from 2 to max. 7) the Master /
Slave Order hast to be respected. First Roadman of
the “Chain” should be set on Master, the following
ones should be set on Slave. The Roadman that
is set on Master takes the control over all other
Roadman (Volume control, switch ON/OFF etc.)
10
VOLUME
Control of Slave Speakers
11
RCA PHONO OUTPUT
Allows line level output for recording or any other
use
12
RCA PHONO INPUT
Allows the connection of any line level device
13
MASTER
General volume control of the system
14
TREBLE
TREBLE / HIGH TONE Equalizer
15
BASS
BASS / LOW TONE Equalizer
16
LINE
Line Input (12) volume controller
17
MIC 1
Microphone 1 (20) volume controller
18
MIC2
Microphone 2 (22) volume controller
19
TAPE
Tape volume controller
20
MIC/LINE
Microphone or Line Input 1. Accepts Jack or XLR
connectors.
21
SPEECH/MUSIC
SPEECH: Microphone Input Level
Music: Line Input Level
22
MIC/LINE
Microphone or Line Input 2. Accepts Jack or XLR
connectors.
23
SPEECH/MUSIC
SPEECH = MIC: Microphone Input Level
Music = LINE: Line Input Level
24
LINK INPUT
This Input allows you to connect a Roadman to
another Roadman. The Link Input of the Slave
Roadman should be connected to the Link Output of
the Master Roadman.
25
CHARGING / LOW BATT
LED Indicator: Low Battery power (red), battery
charging (green blinking), battery fully charged
(green).
26
LED INDICATOR
When red, the system is in operation.
Turned ON.