LD SP1K8 User Manual - Troubleshooting:

13

TROUBLESHOOTING:

ENGLISH

DEUTSCH

FRANCAIS

In the event of incorrect connection or misfunctioning, the amp will activate one or more of its LED to warn about

the problem.

CORRECT fUNCTION

SGNL lights to indicate signal presence.

ICL

The Intelligent Clip Limiter is operating (see page 10).

NO SIGNAL

No Input Signal is reaching the amp.

OvERHEATING

The amplifier has reached the maximum operational 

temperature. Most common cause is: the normal air flow 

is blocked, accumulated dirt, dust or object leaning against 

the grill. Check and clean periodically.

PMS

Several causes can trigger this LED, most common are:

- The amplifier is in power-on sequence,

where output is inhibited until the amp

circuits are ready to operate.

- The internal temperatures rise to near

thermal shutdown point due to unfavourable

operating conditions.

- Excessive mains current consumption.

ICL

PMS

TEMP

SGNL

ICL

PMS

TEMP

SGNL

ICL

PMS

TEMP

SGNL

ICL

PMS

TEMP

SGNL

ICL

PMS

TEMP

SGNL