Summary of LE 25254-D
Page 1
Le 25254-d 3 manuel le 25254-d.
Page 2: 1. Introduction
24 23 22 22 22 20 17 15 11 9 8 8 3 2 english 1. Introduction 2. Safety rules and precautions 3. Warning symbols 4. Machine symbols 5. Machine description 6. Start up instructions 7. Machine usage 8. Maintenance and service 9. Trouble shooting 10. Transport 11. Storing 12. Recycling or disposal your ...
Page 3: 2. Safety Rules And
English to avoid incorrect manipulation of this machine, read the instruction manual before using the machine for the first time. All information included in this manual is relevant and important for your security as well as for the security of other people, animals and objects surrounding you. Shou...
Page 4
English do not overstretch. Maintain your feet well placed on the floor and maintain a good equilibrium at all times. Always maintain proper foot support and run the machine only when standing on a fixed surface, safe and stable. Or unstable sliding surfaces may cause loss of balance or control of t...
Page 5
English use ear protection. If you use this machine very often, visit your doctor regularly to check up on your hearing capacity. Attention! As you are working with ear protectors, you must pay more attention to visual warnings as you will hear less because of the ear protectors. You must always car...
Page 6
English do not refill the machine in a closed area. The petrol and oil vapours all contain dangerous chemical substances. In case of gas concentration due to insufficient ventilation, eliminate from the work area everything that impedes the correct flow of air and do not work in this area again unti...
Page 7
English maintain the cutting elements sharp and clean.Cutting elements that are clean and well sharpened, are easier to control and less likely to block. Maintain the handles of these machines dry and clean. Oily or greasy handles are slippery and will cause loss of control of the machine. Switch of...
Page 8: 3. Warning Symbols
English warning labels indicate required information for the use of the machine. In order to ensure safe operation and maintenance of the machine are the following symbols in the machine. Air positions: do not let people enter in the work area. This area will be of a diameter of 15 meters from the p...
Page 9: 5. Machine Description
English 5. Machine description 5.1. Conditions of usage use this brushcutter only to cut grass and small bushes. Any other type of usage is dangerous and run at your own risk. Do not use the machine for other jobs. For example, do not use the machine to cut wood, plastic materials, bricks or constru...
Page 10
5,6 650 0,70 25.4 le25254-d english 5.3. Technical data the technical characteristics can be changed without prior warning. Description brushcutter brand model engine 2 stroke cylinder capacity (cm 3 ) maximum power (kw) (iso 8893) engine speed at idle speed (min -1 ) 3.000 maximum engine speed (min...
Page 11: 6. Start Up Instructions
English 6.1.List of materials this machine includes the following elements that you will find inside the box: •machine. •protector. •handlebar. •tools. •cuttingaccessories. •harness. •instructionmanual. Ensure that all elements listed above are included with the machine. Thanks to the quali...
Page 12
English 6.2.3. Cutting accessory description 1. Steel disc. 2. 2 wire head. 3. Sheet with notch for coupling the head or disc. 4. Sheet. 5. Protective bell of the disc. 6. Protective hood of the disc. 7. Disc nut. 8. Saucer. 6.2.4. Mounting the nylon bump head 6.2.4.1. Change of the nylon bump head ...
Page 13
English 6.2.6. Harness installation 6.3. Fuel important: the fuel used is highly inflammable. If the fuel or the machine catch fire, fight the flames with a dry dust fire extinguisher. Do not smoke while preparing or refueling. Do not approach any flame or hot element to the fuel. Use unleaded fuel ...
Page 14
English 6.4. Start up 6.4.1. Check points before starting do not use this machine if it becomes damaged or wrongly regulated. Use this machine for the purpose for which it was designed. Any other use may be dangerous for the user to the machine and for people, animals and things you may have around....
Page 15: 7. Machine Usage
English 6.4.5. Points to be verified after machine starts it is neccesary to pay attention to posible loosening or overheating of parts of the machine. If you detect any anomalies stop inmediatly the machine and check it carefully. In case of failure take the machine to the repair service. In any ca...
Page 16
English move in the direction of the user or other people and/ or animals. Do not allow any other person into the work area. All other people must be at least at a distance of 15 metres as it is a dangerous area. Never leave this machine unattended. It is imperative that the engine is turned off whe...
Page 17: 8. Maintenance and Service
English always use the proper protective equipment. Don’t use this machine in areas where you can’t see properly. 7.1.2. Cut with the disc check the disc holder and make sure it is tight and there are no signs of damage or abrasion. Make sure the disc and disc holder are firmly installed in accordan...
Page 18
English maintain your machine clean and in good conditions. Clean the covers with a humid towel. Never use petrol or other flammable products to clean the machine. 8.1.2. Blade sharpening blade sharpening should be done in an authorized after sales. Do not sharpen the blade by yourself. The blade mu...
Page 19
English 8.2.2. Fuel filter the fuel tank is equipped with a filter. It is at the end of the suction pipe and can be removed with the help of a hook of wire. Check the fuel filter regularly. Do not allow dirty in the fuel tank to prevent the filter is dirty. A dirty filter will make it more difficult...
Page 20: 9. Troubleshooting
English depending on the symptoms that you might observe, you can detect the probable cause and solve the problem: if the machine does not start, check the engine compression and the spark from the spark plug. Depending on the symptoms, we attach a table with probable causes and solutions: 9. Troubl...
Page 21
English if the engine does not work correctly (lacks power, no load speed not stable etc), we attach a series of symptoms, the probable cause and its solution: should you not be able to solve the problem, please take the machine to an official service agent. To find out your nearest official after s...
Page 22: 10. Transport
English 10. Transport never pick up or carry the machine while the engine is running. It is always neccesary too to turn off the motor before transporting the machine between work locations. Wait 5 minutes before switching off the motor to transport the machine. Always carry the machine with the mot...
Page 23: 13. Warranty Conditions
English 13.1. Warranty period - according to the following described terms (1999/44 ce) the warranty period is 2 years from the purchase date, and it will cover faulty pieces owing to an incorrect manufacture. 13.2. Exclusions garland warranty will not cover: - pieces worn out due to wear and tear. ...
Page 24
English declaration of conformity (ce) who has signed below, aurelio de michele, authorised by dunsch europe srl , with the following address via dell'artigianato n. 10 ,i-29010 gragnano trebbiense (italy), declares that the products brand lea models le25254-d (pnbc206b-3b) with serial number of yea...