1. DL manuals
  2. Leader
  3. Monitor
  4. LV 5800
  5. Instruction Manual

Leader LV 5800 Instruction Manual

Manual is about: MULTI MONITOR/ETHERNET

Summary of LV 5800

  • Page 1

    Lv 5800 multi monitor instruction manual (ethernet).

  • Page 2

    Table of contents 1. Introduction.......................................................................................................... 1 1.1 about network .......................................................................................................................... 1 1.2 trademark a...

  • Page 3

    1. Introduction 1 1. Introduction this manual explains how to control an lv 5800 remotely over an ethernet. For other explanations and notes, see the main lv 5800 instruction manual. 1.1 about network the remote control capability operation via the ethernet is confirmed only under the local network ...

  • Page 4

    2. Ethernet 2 2. Ethernet you can set nearly all settings that can be specified using the front panel keys by transferring the command to lv 5800 using the pc that is connected via ethernet network. In addition, the various data that is detected by lv 5800 can be transferred to the pc that is connec...

  • Page 5

    2. Ethernet 3 2.2 ftp file transfer to transfer files from lv 5800 to pc connected to the network, ftp is used. For a description on how to start (*1) ftp, see the instruction manual that came with your pc. The user name and password cannot be changed on the lv 5800. When the ftp starts, “user” appe...

  • Page 6

    2. Ethernet 4 2.3 command entry procedure the system of control commands used on the ethernet network follows the menu structure. Reading this manual and the instruction manuals of each unit of the lv 5800 will facilitate the process. ● entry method of the command the entry method of the command is ...

  • Page 7

    2. Ethernet 5 2.4 telnet commands 2.4.1 lv 5800 commands (multi monitor) ● front panel lv 5800 (multi monitor) command parameter1 description 1 selects first area 2 selects second area 3 selects third area 4 selects fourth area display ? Queries the selected area on selects multi screen display off ...

  • Page 8

    2. Ethernet 6 ● platform setup (general setup) lv 5800 (multi monitor) command parameter1 description single sets the single input mode. Multi sets the multi input mode. (doesn’t interlock with the line selection.) multi_line sets the multi input mode. (interlocks with the line selection.) sys:platf...

  • Page 9

    2. Ethernet 7 ● platform setup (remote) lv 5800 (multi monitor) command parameter1 description bit recalls the presets from no.1 to 8 by bit. Binary recalls the presets from no.1 to 60 by binary code. Sys:platform:remote_mode ? Queries the remote mode. Positive high is output at the time of error de...

  • Page 10

    2. Ethernet 8 ● date&time lv 5800 (multi monitor) command parameter1 description yyyy/mm/dd,hh:mm:ss sets up the date and time. Sys:date ? Queries the date and time ● system information lv 5800 (multi monitor) command parameter1 description sys:unit1_info - queries the unit 1 type sys:unit2_info - q...

  • Page 11

    2. Ethernet 9 2.4.2 lv 58ser01a commands (sdi input) ● unit setup (general setup) lv 58ser01a (sdi input) command parameter1 parameter2 description single sets the link format to single link. Dual sets the link format to dual link. 2k sets the link format to 2048 × 1080 (2k) of dual link. Sys:unit:l...

  • Page 12

    2. Ethernet 10 command parameter1 parameter2 description 720p/24 sets the format to 720p/24 at the time of single link. 720p/23.98 sets the format to 720p/23.98 at the time of single link. 525i/59.94 sets the format to 525i/59.94 at the time of single link. Sys:unit:manual_format 1,2,3,4 625i/50 set...

  • Page 13

    2. Ethernet 11 ● unit setup (error setup1) lv 58ser01a (sdi input) command parameter1 parameter2 description on detects the trs errors. Off does not detect the trs errors. Sys:unit:error:trs 1,2,3,4 ? Queries the presence of trs error detection. On detects the line number errors. Off does not detect...

  • Page 14

    2. Ethernet 12 ● unit setup (error setup2) lv 58ser01a (sdi input) command parameter1 parameter2 description on detects the parity errors in the ancillary data. Off does not detect the parity errors in the ancillary data. Sys:unit:error:anc:parity 1,2,3,4 ? Queries the presence of parity error detec...

  • Page 15

    2. Ethernet 13 ● unit setup (error setup3) lv 58ser01a (sdi input) command parameter1 parameter2 description hd1m_sd1m sets the lpf for gamut error detection to 1 mhz. Hd2.8m_sd1m sets the lpf for gamut error detection to 2.8 mhz as for hd-sdi and to 1 mhz as for sd-sdi. Off turns off the lpf for ga...

  • Page 16

    2. Ethernet 14 ● unit setup (error setup4) lv 58ser01a (sdi input) command parameter1 parameter2 description on detects the freeze errors. Off does not detect the freeze errors. Sys:unit:error:freeze 1,2,3,4 ? Queries the presence of freeze error detection. 0 to 100 sets the detection area (upper) f...

  • Page 17

    2. Ethernet 15 ● unit setup (error setup5) lv 58ser01a (sdi input) command parameter1 parameter2 description on detects the level errors. Off does not detect the level errors. Sys:unit:error:level 1,2,3,4 ? Queries the presence of level error detection. -51 to 766 sets the upper limit (mv) of lumina...

  • Page 18

    2. Ethernet 16 ● wfm - inten/scale lv 58ser01a (sdi input) command parameter1 description -128 to 127 adjusts the intensity of the video waveforms. Wfm:inten:wfm ? Queries the intensity of the video waveforms. White sets the waveform display color to white. Green sets the waveform display color to g...

  • Page 19

    2. Ethernet 17 command parameter1 description x1 in case of line display, set the sweep magnification so that the waveform fits on the screen. X10 in case of line display, set the sweep magnification to x10 with respect to x1. X20 in case of line display, set the sweep magnification to x20 with resp...

  • Page 20

    2. Ethernet 18 command parameter1 description remove displays the active period for the component display. H_view displays the active period and the horizontal blanking period for the component display. V_view displays the active period and the vertical blanking period for the component display. All...

  • Page 21

    2. Ethernet 19 ● vector lv 58ser01a (sdi input) command parameter1 description vector - displays vector waveforms. ● vector - inten/scale lv 58ser01a (sdi input) command parameter1 description -128 to 127 sets the intensity of the vector waveform. Vector:inten:vector ? Queries the intensity of the v...

  • Page 22

    2. Ethernet 20 ● vector - color system lv 58ser01a (sdi input) command parameter1 description component sets the color matrix to component display. Composite sets the color matrix to pseudo-composite display. Vector:matrix ? Queries the color matrix setting. Auto selects ntsc or pal automatically wh...

  • Page 23

    2. Ethernet 21 ● picture lv 58ser01a (sdi input) command parameter1 description picture - displays the pictures. ● picture - adjust lv 58ser01a (sdi input) command parameter1 description -30 to 30 adjusts the brightness of the picture display (%). Picture:bright ? Queries the brightness of the pictu...

  • Page 24

    2. Ethernet 22 command parameter1 description example) 1 to 1125 (depending on the format) sets the line of the line select. Picture:line_number ? Queries the selected line of the line select. ● picture - display lv 58ser01a (sdi input) command parameter1 description fit displays the picture size op...

  • Page 25

    2. Ethernet 23 ● status lv 58ser01a (sdi input) command parameter1 description status - sets the status display. ● status - event log lv 58ser01a (sdi input) command parameter1 description status:log - displays the error log screen. Start start the error log. Stop stop the error log. Status:log:log ...

  • Page 26

    2. Ethernet 24 ● status - counter lv 58ser01a (sdi input) command parameter1 description sec the error count is updated in unit of seconds, and it displays as number of times. Field the error count is updated in unit of fields, and it displays as number of times. Per_field the error count is updated...

  • Page 27

    2. Ethernet 25 2.4.3 lv 58ser02 commands (eye pattern unit) ● unit setup lv 58ser02 (eye pattern unit) command parameter1 parameter2 description on enables the amplitude error detection for hd. Off disables the amplitude error detection for hd. Sys:unit:error:hd_amp 1,2,3,4 (*1) ? Queries the presen...

  • Page 28

    2. Ethernet 26 command parameter1 parameter2 description 10 to 200 sets the upper limit (%) of the timing jitter for hd. Sys:unit:error:hd_timing_jit:max 1,2,3,4 ? Queries the upper limit of the timing jitter for hd. On detects the error of current jitter value for hd. Off does not detect the error ...

  • Page 29

    2. Ethernet 27 command parameter1 parameter2 description on detects the error related to the difference between the rise time (tr) and fall time (tf) for sd. Off does not detect the error (tr-tf) for sd. Sys:unit:error:sd_delta 1,2,3,4 ? Queries the presence of the error (tr-tf) detection for sd. 40...

  • Page 30

    2. Ethernet 28 ● eye - eye setup lv 58ser02 (eye pattern unit) command parameter1 description on automatically measures the eye pattern. Off does not automatically measure the eye pattern. Eye:auto_measure ? Queries the status of automatic measurement of eye pattern. Cal sets the gain of the eye pat...

  • Page 31

    2. Ethernet 29 ● eye - jitter setup lv 58ser02 (eye pattern unit) command parameter1 description on holds the peak value of the jitter waveform. Off does not hold the peak value of the jitter waveform. Eye:jitter:peak_hold ? Queries the hold status of the peak value of the jitter waveform. Eye:jitte...

  • Page 32

    2. Ethernet 30 2.4.4 lv 58ser03 commands (composite video input) ● wfm lv 58ser03 (composite video input) command parameter1 description wfm - displays the video signal waveform. ● wfm - inten/scale lv 58ser03 (composite video input) command parameter1 description -128 to 127 adjusts the intensity o...

  • Page 33

    2. Ethernet 31 command parameter1 description x1 in case of field display, set the sweep magnification so that the waveform fits on the screen. X20 in case of field display, set the sweep magnification to x20 with respect to x1. X40 in case of field display, set the sweep magnification to x40 with r...

  • Page 34

    2. Ethernet 32 ● vector - inten/scale lv 58ser03 (composite video input) command parameter1 description -128 to 127 sets the intensity of the vector waveform. Vector:inten:vector ? Queries the intensity of the vector waveform. White sets the waveform display color to white. Green sets the waveform d...

  • Page 35

    2. Ethernet 33 ● vector - color system lv 58ser03 (composite video input) command parameter1 description 0p sets the setup to exclude. 7.5p sets the setup to 7.5%. Vector:matrix:setup ? Queries the setup value. 100p sets the scale that maches the 100% color bar. 75p sets the scale that maches the 75...

  • Page 36

    2. Ethernet 34 command parameter1 description -0.30 to 0.30 adjusts the bias of the r signal (×100%). Picture:bias:r ? Queries the bias of the r signal. -0.30 to 0.30 adjusts the bias of the g signal (×100%). Picture:bias:g ? Queries the bias of the g signal. -0.30 to 0.30 adjusts the bias of the b ...

  • Page 37

    2. Ethernet 35 2.4.5 lv 58ser04 commands (mpeg decoder) ● unit setup lv 58ser04 (mpeg decoder) command parameter1 parameter2 description on sets the selection method of decode pid to an automatic setting. Off sets the selection method of decode pid to a manual setting. Sys:unit:semi_auto 1,2,3,4 (*1...

  • Page 38

    2. Ethernet 36 command parameter1 parameter2 description on detects the pcr error. Off does not detect the pcr error. Sys:unit:error:pcr 1,2,3,4 ? Queries the presence of detecting the pcr error. 10 to 200 sets the interval (msec) becoming the pcr error. Sys:unit:error:pcr:cycle 1,2,3,4 ? Queries th...

  • Page 39

    2. Ethernet 37 ● wfm - inten/scale lv 58ser04 (mpeg decoder) command parameter1 description -128 to 127 adjusts the intensity of the video waveforms. Wfm:inten:wfm ? Queries the intensity of the video waveforms. White sets the waveform display color to white. Green sets the waveform display color to...

  • Page 40

    2. Ethernet 38 command parameter1 description x1 in case of line display, set the sweep magnification so that the waveform fits on the screen. X10 in case of line display, set the sweep magnification to x10 with respect to x1. Active in case of line display, magnifies and displays the waveform in th...

  • Page 41

    2. Ethernet 39 ● wfm - arrange lv 58ser04 (mpeg decoder) command parameter1 description flat sets the filter to flat for the component display. Lowpass sets the filter to lpf for the component display. Wfm:filter:normal ? Queries the filter setting for the component display. Flat sets the filter to ...

  • Page 42

    2. Ethernet 40 ● vector lv 58ser04 (mpeg decoder) command parameter1 description vector - displays vector waveforms. ● vector - inten/scale lv 58ser04 (mpeg decoder) command parameter1 description -128 to 127 sets the intensity of the vector waveform. Vector:inten:vector ? Queries the intensity of t...

  • Page 43

    2. Ethernet 41 ● vector - color system lv 58ser04 (mpeg decoder) command parameter1 description component sets the color matrix to component display. Composite sets the color matrix to pseudo-composite display. Vector:matrix ? Queries the color matrix setting. Auto selects ntsc or pal automatically ...

  • Page 44

    2. Ethernet 42 ● picture - marker lv 58ser04 (mpeg decoder) command parameter1 description on displays the 4:3 aspect marker. Off does not display the 4:3 aspect marker. Picture:marker:4_3 ? Queries the presence of displaying the 4:3 aspect marker. On displays the 16:9 aspect marker. Off does not di...

  • Page 45

    2. Ethernet 43 2.4.6 lv 58ser40a commands (digital audio) ● unit setup lv 58ser40a (digital audio) command parameter1 parameter2 description input sets all rear bnc connector to input. Output sets all rear bnc connector to output. Sys:unit:ext_bnc 1,2,3,4 (*1) ? Queries all rear bnc connector settin...

  • Page 46

    2. Ethernet 44 ● audio - channel select lv 58ser40a (digital audio) command parameter1 description 8ch sets the number of measurement channels to 8ch. 16ch sets the number of measurement channels to 16ch. Audio:ch_sel:number ? Queries the number of measurement channels. 1_8ch sets the channels that ...

  • Page 47

    2. Ethernet 45 command parameter1 description -40.0 to 0.0 sets the over level.(dbfs) audio:meter:over_level ? Queries the over level. -40.0 to 0.0 sets the warning level. (dbfs) audio:meter:warning_level ? Queries the warning level. -40.0 to 0.0 sets the reference level. (dbfs) audio:meter:ref_leve...

  • Page 48

    2. Ethernet 46 command parameter1 description ch1 to ch16 sets the channel to be assigned to the l3 axis of the multi lissajous waveform. Audio:lissajou:map:multi_l3 ? Queries the channel to be assigned to the l3 axis of the multi lissajous waveform. Ch1 to ch16 sets the channel to be assigned to th...

  • Page 49

    2. Ethernet 47 ● audio - s.Image setup lv 58ser40a (digital audio) command parameter1 description -128 to 127 sets the intensity of the sound image waveform. Audio:s_image:inten:s_image ? Queries the intensity of the sound image waveform. -8 to 7 sets the intensity of the scale. Audio:s_image:inten:...

  • Page 50

    2. Ethernet 48 ● audio - status setup lv 58ser40a (digital audio) command parameter1 description default displays the status screen. Ch_status displays the channel status screen. User_bit displays the user bit screen. Audio:status:display ? Queries the display formt of the status screen. Prm1 to prm...

  • Page 51

    2. Ethernet 49 command parameter1 description ltrt sets the function of the aux ch to ltrt. Loro sets the function of the aux ch to loro. Mono sets the function of the aux ch to mono. Mute sets the function of the aux ch to mute. Audio:dolby:aux_ch ? Sets the function of the aux ch. Line sets the dy...

  • Page 52

    2. Ethernet 50 2.5 ftp commands carries out the ftp command after carrying out the make command of telnet to retrieve each file by using the ftp. Example) operation of retrieving a text file of the event log to a computer 1) starts telnet and carries out "make log" of the telnet command. 2) starts f...

  • Page 53

    3. Snmp 51 3. Snmp 3.1 description snmp (simple network management protocol) can be used to control the lv 5800 and notify sdi signal errors. The following sections describe how to set the lv 5800 and mib (management information base) when using snmp. 3.2 snmp version supported the lv 5800 supports ...

  • Page 54

    3. Snmp 52 3.3.2 setting the lv 5800 1). Set the ip address. 2). Turn off the lv 5800 and back on. 3). Check that get and set operations can be carried out from the snmp manager. 4). Carry out a set operation from the snmp manager to assign the ip address of the snmp manager to the mib object below....

  • Page 55

    3. Snmp 53 3.4 mib this section describes the mib (management information base) that the lv 5800 uses. The indications in the access column in the tables are defined as follows: r/o information that can be retrieved using the snmp manager. R/w information that can be retrieved and set using the snmp...

  • Page 56

    3. Snmp 54 ● system group mib oid syntax access support sysdescr system.1 displaystring r/o ○ sysobjectid system.2 objectid r/o ○ sysuptime system.3 timeticks r/o ○ syscontact (*1) system.4 displaystring r/w ○ sysname (*1) system.5 displaystring r/w ○ syslocation (*1) system.6 displaystring r/w ○ sy...

  • Page 57

    3. Snmp 55 ● ip group mib oid syntax access support ipforwarding ip.1 integer r/o ○ ipdefaultttl ip.2 integer r/o ○ ipinreceives ip.3 counter r/o ○ ipinhdrerrors ip.4 counter r/o ○ ipinaddrerrors ip.5 counter r/o ○ ipforwdatagrams ip.6 counter r/o ○ ipinunknownprotos ip.7 counter r/o ○ ipindiscards ...

  • Page 58

    3. Snmp 56 ● icmp group mib oid syntax access support icmpinmsgs icmp.1 counter r/o ○ icmpinerrors icmp.2 counter r/o ○ icmpindestunreachs icmp.3 counter r/o ○ icmpintimeexcds icmp.4 counter r/o ○ icmpinparmprobs icmp.5 counter r/o ○ icmpinsrcquenchs icmp.6 counter r/o ○ icmpinredirects icmp.7 count...

  • Page 59

    3. Snmp 57 ● udp group mib oid syntax access support udpindatagrams udp.1 counter r/o ○ udpnoports udp.2 counter r/o ○ udpinerrors udp.3 counter r/o ○ udpoutdatagrams udp.4 counter r/o ○ udptable udp.5 aggregate -- ○ udpentry udptable.1 aggregate -- ○ udplocaladdress udpentry.1 ipaddress r/o ○ udplo...

  • Page 60

    3. Snmp 58 3.4.2 enterprise mib ● enterprise number the enterprise number of leader electronics corporation is 20111. Iso(1).Org(3).Dod(6).Internet(1).Private(4).Enterprises(1).Leader(20111) ● retrieving the enterprise mib file download the file on the lv 5800 using ftp. The file name is “lv5800.My”...

  • Page 61

    3. Snmp 59 ● l10basictbl(1) group mib oid syntax access value/range l10basdisplay l10basictbl.1 integer r/w 1 = display1 2 = display2 3 = display3 4 = display4 l10basmulti l10basictbl.2 integer r/w 1 = on 2 = off l10basinputtbl l10basictbl.3 aggregate -- -- l10basinputunit l10basinputtbl.1 integer r...

  • Page 62

    3. Snmp 60 ● l10systemtbl(2) group lv 5800 (multi monitor) mib oid syntax access value/range l10sysunittbl l10systemtbl.1 aggregate -- -- l10sysunitsetup (*1) l10sysunittbl.1 integer r/w 1 = unit1 2 = unit2 3 = unit3 4 = unit4 5 = unit5 6 = unit6 l10sysunit1info l10sysunittbl.2 integer r/o 1 = none ...

  • Page 63

    3. Snmp 61 mib oid syntax access value/range l10sysunitmanualformat l10sysunittbl.9 integer r/w 1 = 1080i/60 2 = 1080psf/30 3 = 1080i/59.94 4 = 1080psf/29.97 5 = 1080i/50 6 = 1080psf/25 7 = 1080psf/24 8 = 1080psf/23.98 9 = 1080p/30 10 = 1080p/29.97 11 = 1080p/25 12 = 1080p/24 13 = 1080p/23.98 14 = 7...

  • Page 64

    3. Snmp 62 mib oid syntax access value/range l10sysplatformalarm1unit l10sysplatformtbl.12 integer r/w 1 = unit1 2 = unit2 3 = unit3 4 = unit4 5 = all l10sysplatformalarm2unit l10sysplatformtbl.13 integer r/w 1 = unit1 2 = unit2 3 = unit3 4 = unit4 5 = all l10sysplatformalarm3unit l10sysplatformtbl....

  • Page 65

    3. Snmp 63 ● l10systemtbl(2) group lv 58ser01a (sdi input) mib oid syntax access value/range l10sysunitsditbl l10systemtbl.2 aggregate -- -- l10sysunitsdilinkformat l10sysunitsditbl.1 integer r/w 1 = single 2 = dual 3 = 2k l10sysunitsdiipsf l10sysunitsditbl.2 integer r/w 1 = interlace 2 = seg.Fram l...

  • Page 66

    3. Snmp 64 mib oid syntax access value/range l10sysunitsdierraudtbl l10sysunitsditbl.9 aggregate -- -- l10sysunitsdierraudiobch l10sysunitsdierraudtbl.1 integer r/w 1 = on 2 = off l10sysunitsdierraudiodbn l10sysunitsdierraudtbl.2 integer r/w 1 = on 2 = off l10sysunitsdierraudioparity l10sysunitsdier...

  • Page 67

    3. Snmp 65 ● l10systemtbl(2) group lv 58ser40a (digital audio) mib oid syntax access value/range l10sysunitaudiotbl l10systemtbl.3 aggregate -- -- l10sysunitaudioextbnc l10sysunitaudiotbl.1 integer r/w 1 = input 2 = output l10sysunitaudioerrhdtbl l10sysunitaudiotbl.2 aggregate -- -- l10sysunitaudioe...

  • Page 68

    3. Snmp 66 ● l10systemtbl(2) group lv 58ser02 (eye pattern unit) mib oid syntax access value/range l10sysuniteyetbl l10systemtbl.4 aggregate -- -- l10sysuniteyeerrhdtbl l10sysuniteyetbl.1 aggregate -- -- l10sysuniteyeerrhdamp l10sysuniteyeerrhdtbl.1 integer r/w 1 = on 2 = off l10sysuniteyeerrhdampup...

  • Page 69

    3. Snmp 67 ● l10systemtbl(2) group lv 58ser04 (mpeg decoder) mib oid syntax access value/range l10sysunitmpegtbl l10systemtbl.11 aggregate -- -- l10sysunitmpegsemiautosearch l10sysunitmpegtbl.1 integer r/w 1 = on 2 = off l10sysunitmpegerrsyncbyte l10sysunitmpegtbl.2 integer r/w 1 = on 2 = off l10sys...

  • Page 70

    3. Snmp 68 mib oid syntax access value/range l10wfmscaletbl l10wfmtbl.3 aggregate -- -- l10wfmscaleunit l10wfmscaletbl.1 integer r/w 1 = hdv-sdp 2 = hdv-sdv 3 = hdp-sdp l10wfmscalecolor75per l10wfmscaletbl.2 integer r/w 1 = on 2 = off l10wfmscalecolor l10wfmscaletbl.3 integer r/w 1 = white 2 = yello...

  • Page 71

    3. Snmp 69 mib oid syntax access value/range l10wfmlinenumber l10wfmlineseltbl.3 integer r/w 1 to 1125 l10wfmfiltertbl l10wfmtbl.7 aggregate -- -- l10wfmfilternormal l10wfmfiltertbl.1 integer r/w 1 = flat 2 = lowpass l10wfmfiltercomposite l10wfmfiltertbl.2 integer r/w 1 = flat 2 = flat-lum 3 = flat-...

  • Page 72

    3. Snmp 70 mib oid syntax access value/range l10vecgaintbl l10vectortbl.3 aggregate -- -- l10vecgainvar l10vecgaintbl.1 integer r/w 1 = cal 2 = var l10vecgainval l10vecgaintbl.2 octetstrin r/w 0.200 to 2.000 l10vecgainmag l10vecgaintbl.3 integer r/w 1 = x1 2 = x5 3 = iq l10veclineseltbl l10vectortbl...

  • Page 73

    3. Snmp 71 ● l10picturetbl(5) group * valid when mode of display selected is picture. Mib oid syntax access value/range l10picbright l10picturetbl.1 integer r/w -30 to 30 l10piccontrast l10picturetbl.2 octetstring r/w 0.70 to 1.30 l10picgaintbl l10picturetbl.3 aggregate -- -- l10picgainred l10picgai...

  • Page 74

    3. Snmp 72 mib oid syntax access value/range l10picgamuttbl l10picturetbl.9 aggregate -- -- l10picgamuterror l10picgamuttbl.1 integer r/w 1 = on 2 = off l10picgamutpattern l10picgamuttbl.2 integer r/w 1 = white 2 = red 3 = mesh l10picdisptbl l10picturetbl.10 aggregate -- -- l10picdispafd l10picdispt...

  • Page 75

    3. Snmp 73 mib oid syntax access value/range l10audlissajouform l10audlissajoutbl.3 integer r/w 1 = x-y 2 = matrix l10audlissajouautogain l10audlissajoutbl.4 integer r/w 1 = on 2 = off l10audlissajoumaptbl l10audlissajoutbl.5 aggregate -- -- l10audlissajoumapsinglel l10audlissajoumaptbl.1 integer r/...

  • Page 76

    3. Snmp 74 mib oid syntax access value/range l10audlissajoumapmultir1 l10audlissajoumaptbl.4 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audlissajoumapmultil2 l10audlissajoumaptbl.5 integ...

  • Page 77

    3. Snmp 75 mib oid syntax access value/range l10audlissajoumapmultil3 l10audlissajoumaptbl.7 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audlissajoumapmultir3 l10audlissajoumaptbl.8 integ...

  • Page 78

    3. Snmp 76 mib oid syntax access value/range l10audlissajoumapmultir4 l10audlissajoumaptbl.10 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audlissajoumapmultil5 l10audlissajoumaptbl.11 int...

  • Page 79

    3. Snmp 77 mib oid syntax access value/range l10audlissajoumapmultil6 l10audlissajoumaptbl.13 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audlissajoumapmultir6 l10audlissajoumaptbl.14 int...

  • Page 80

    3. Snmp 78 mib oid syntax access value/range l10audlissajoumapmultir7 l10audlissajoumaptbl.16 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audlissajoumapmultil8 l10audlissajoumaptbl.17 int...

  • Page 81

    3. Snmp 79 mib oid syntax access value/range l10audsimagemaptbl l10audsimagetbl.4 aggregate -- -- l10audsimagemapl l10audsimagemaptbl.1 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audsima...

  • Page 82

    3. Snmp 80 mib oid syntax access value/range l10audsimagemaprs l10audsimagemaptbl.4 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audsimagemapc l10audsimagemaptbl.5 integer r/w 1 = ch1 2 = ...

  • Page 83

    3. Snmp 81 mib oid syntax access value/range l10audsimagemapll l10audsimagemaptbl.7 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audsimagemaprr l10audsimagemaptbl.8 integer r/w 1 = ch1 2 =...

  • Page 84

    3. Snmp 82 mib oid syntax access value/range l10audstatususerbit l10audstatustbl.3 integer r/w 1 = ch1 2 = ch2 3 = ch3 4 = ch4 5 = ch5 6 = ch6 7 = ch7 8 = ch8 9 = ch9 10 = ch10 11 = ch11 12 = ch12 13 = ch13 14 = ch14 15 = ch15 16 = ch16 l10audstatuserrorreset l10audstatustbl.4 integer r/wo 1 = error...

  • Page 85

    3. Snmp 83 mib oid syntax access value/range l10auddolbyemetaprm l10auddolbytbl.5 integer r/w 1 = prm1 2 = prm2 3 = prm3 4 = prm4 5 = prm5 6 = prm6 7 = prm7 8 = prm8 l10auddolbydlistening l10auddolbytbl.6 integer r/w 1 = full 2 = ex 3 = 3stereo 4 = phantom 5 = stereo 6 = mono l10auddolbydprologic l1...

  • Page 86

    3. Snmp 84 ● l10statustbl(7) group * valid when mode of display selected is status. Mib oid syntax access value/range l10stacounter l10statustbl.1 integer r/w 1 = sec 2 = field 3 = per-field l10stareset l10statustbl.2 integer r/wo 1 = status reset l10stalogtbl l10statustbl.3 aggregate -- -- l10stalo...

  • Page 87

    3. Snmp 85 mib oid syntax access value/range l10eyejittergain l10eyejittertbl.3 integer r/w 1 = x1 2 = x2 3 = x8 l10eyejittersweep l10eyejittertbl.4 integer r/w 1 = 1h 2 = 2h 3 = 1v 4 = 2v l10eyejitterfilter l10eyejittertbl.5 integer r/w 1 = 100khz 2 = 1khz 3 = 100hz 4 = 10hz 5 = timing 6 = alignmen...

  • Page 88

    3. Snmp 86 ● l10traptbl(9) group mib oid syntax access value/range l10trapstrtbl l10traptbl.1 aggregate -- --(variable binding list) l10trapiptbl l10traptbl.2 aggregate -- -- l10trapip1tbl l10trapiptbl.1 aggregate -- -- l10trapmanagerip1 l10trapip1tbl.1 ipaddress r/w transmission destination of trap...

  • Page 89

    3. Snmp 87 3.5.2 specific trap description specific trap type fan stop detection 1 no signal 3 line number error detection 6 crc error detection (luma) 7 crc error detection (chroma) 8 checksum error detection 9 bch error detection 10 edh error detection 11 reserved area error detection 12 parity er...

  • Page 90

    3. Snmp 88 3.5.3 variable binding list ● index 1 oid: leader(20111).Lv5800(10).Lv5800st1(1).Traptbl(9).Trapstrtbl(1).1.0 syntax: counter range: 1 to 4294967295 (overflow occurs if this range is exceeded) description: the total number of enterprise traps sent after starting up. ● index 2 oid: leader(...

  • Page 91

    3. Snmp 89 list of format information list of error information for trap for trap syntax format syntax description 1080i/60 1080i/60 crc_y_err crc error detection (luma) 1080sf/30 1080sf/30 crc_c_err crc error detection (chroma) 1080i/59.94 1080i/59.94 edh_err edh error detection 1080sf/29.97 1080sf...

  • Page 92

    4. Firmware revision history 90 4. Firmware revision history this manual was written for firmware version 6.2. To confirm the version, press a key in order of sys => f･5 system information. ● ver 5.5 ・ telnet and snmp support were added for the new features of the lv 58ser01(a). ● ver 5.4 ・ telnet a...

  • Page 93

    Leader electronics corp. 2-6-33 tsunashima-higashi, kohoku-ku, yokohama 223-8505, japan phone:81-45-541-2123 fax:81-45-541-2823 http://www.Leader.Co.Jp nov. 20, 2009 ver.10 (fw ver.6.2).