Leadtek BVA 8051 series Quick Installation Manual

Manual is about: Broadband VoIP Adaptor

Summary of BVA 8051 series

  • Page 1

    Bva 8051/8052/8053 series broadband voip adaptor quick installation guide code: lr8051/8052/8053 version a p/n: w0500942.

  • Page 2

    1 package contents 1. Broadband voip adapter 2. Power adapter 3. Ethernet cable 4. Telephone line (8051s and 8053r only) 5. Quick installation guide installation bva 8051 series (8051s and 8051sl) internet: connect to a router or a device accessing the internet. (eg. An adsl or cable modem) line: co...

  • Page 3

    2 back panel for 8052d installation and configuration.

  • Page 4

    3 powering on the device each time you turn on the device (including the very first time), you should leave it alone for at least 5 minutes. During this period, the configuration information maybe be obtained from your service provider and some critical functions like firmware updating can be perfor...

  • Page 5

    4 changing settings using a telephone set (bva 8051 and bva 8052 series only) follow the steps in "restoring factory defaults" to reset the device. In step #3, when you see the power led flashing rapidly, immediately release the reset button. Your telephone handset should now be beeping. You can per...

  • Page 6

    5 configuring the auto provisioning system (aps) the auto provisioning system requires the support of your telephony service provider. You also need specific aps parameters. Please check with your service provider for details. To configure the auto provisioning system in the device, you need to use ...

  • Page 7

    6 switching between ip and pstn calls (8051s and 8053r only) if you have an 8051s or an 8053r and connected a telephone line (pstn) to the line port, you can use the same telephone set to make either ip or pstn calls. When you pick up the telephone handset, the default type determines whether your c...

  • Page 8

    7 using the advanced calling features advanced calling features depend on your service provider. Please contact your service provider before using. Note: f denotes the flash key on your telephone set. If your phone does not have a flash key, you can simulate a flash by pressing and releasing quickly...

  • Page 9: Led Indicators

    8 led indicators bva8051 series label power link activity line phone message behavior ON:power on and IP address acquired OFF:power off SlowBlinking: Acquiring IP address ON:LAN is connected OFF:LAN is not connected Blinking: Network traffic on LAN ON:PSTN line is off-hook (In use) OFF:PSTN line is ...

  • Page 10: Led Indicators

    9 bva8053 series label power lan wan line phone status behavior ON:power on OFF:power off ON:LAN is connected OFF:LAN is not connected Blinking: Network traffic on LAN ON:WAN is connected OFF: WAN Is not connected Blinking: Network traffic on WAN ON:PSTN line is Off-hook (In use) OFF:PSTN line is On...

  • Page 11: Fcc Statement

    10 this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tes...