1. DL manuals
  2. Leadtek
  3. Security System
  4. NSC 3615
  5. User Manual

Leadtek NSC 3615 User Manual - Add One More Group.

Manual is about: Network Surveillance Camera

Summary of NSC 3615

  • Page 1

    Network surveillance camera nsc 3615 / nsc 3621 / nsc 3622 user manual.

  • Page 2

    - page 2 - date version description author 2006.09.25 1.0.0 standard operation 1450 2006.11.08 1.1.0 1. Installation process enhanced 2. Webs enhanced with : ¾ system privacy password ¾ network dido ddns rtp port ¾ camera encode type 1450 2006.11.09 1.1.1 md sensitivity modification 1450 2006.12.06 ...

  • Page 3

    - page 3 - no part of this document may be copied or reproduced in any form or by any means without the prior written consent of leadtek research inc. Leadtek makes no warranties with respect to this documentation and disclaims any implied warranties of merchantability, quality, or fitness for any p...

  • Page 4: Index

    - page 4 - index package contents ..................................................... 6 introduction ................................................................ 9 key features ........................................................... 11 how to connect？ .........................................

  • Page 5

    - page 5 - use windows client for ip cam ............................... 49 install netcam smc ............................................................................................. 49 quick launch ..................................................................................................

  • Page 6: Package Contents

    Package contents contents - nsc3615- -nsc3621- leadtek surveillance camera - nsc3615- -nsc3621- accessories software cd:.

  • Page 7

    - page 7 - ethernet cable: -nsc3615- / -nsc3621 power adaptor: -nsc3615- -nsc3621-.

  • Page 8

    - page 8 - spk-mic-pwr 3-in-1 cable -nsc3621- mounting rack: -nsc3615-.

  • Page 9: Introduction

    - page 9 - please unpack the product package with caution; inspect the items closely. If you find any damaged item, please contact your local distributor immediately. Also, please keep the box and packing material for future use in the event of future shipments. Introduction high-quality, high effic...

  • Page 10

    - page 10 - unparalleled surveillance functions where nothing slips through your watch the network surveillance camera’s motion detection function sends out the alarm when any movement of any object occurring on the scene is detected, which makes it ideal for home and after-hour facility security. 1...

  • Page 11: Key Features

    - page 11 - key features surveillance camera nsc3615 / nsc3621 bundled windows client surveillance and management center display resolution h.263(cif , qcif), mpeg-4(d1, vga, qvga, cif, qcif) image quality 28 level channel 1/4/9 (with multiple camera connections) connection indication video, audio a...

  • Page 12: How to Connect？

    - page 12 - how to connect？ both nsc3615 / nsc3621 equip with 1di / 1do connector and pc compatible mono microphone and speaker. You can also find 2 pinholes (nsc3615:rear view / nsc3621: back side view of bottom) on surveillance camera. One is factory default and the other one is reset. Factory def...

  • Page 13: Led Indication

    - page 13 - led indication network led : blue - off : network link down or service unavailable - on : network link is up - blinking : in/out traffic on going system 1 led : yellow - no rtp packet traffic - rtp received from remote peer (periodic flashing, 0.5 second on, 0.5 second off) system 2 led ...

  • Page 14: - Nsc3621 -

    - page 14 - - nsc3621 - dido connector same as nsc3615 dido interface. Di : 0 ~ 12v(with 5v logic trigger) / 20 ma(minimum) do: 30vdc / 1a warm reboot factory default + _ 10x optical / 10 digital ccd.

  • Page 15: System Requirement

    - page 15 - system requirement before you give surveillance camera a shot, please check setting of your notebook / pc and see if following requirement is proper. Z windows xp with service pack 2 installed or directx 9.0 installed z best screen resolution : 1024x768 z color quality : full color (32 b...

  • Page 16: Software Installation

    - page 16 - -nsc3621- software installation follow the procedures describe bellows to do a quick installation setup / test. 1. Device connection: connect your surveillance camera to pc (nsc3621 is taken as an example).

  • Page 17

    - page 17 - i) use crossover ethernet cable: ii) connect devices with ethernet hub / switch (normal rj-45 cable) 2. Configure your pc to the same subnet segment of surveillance camera. I) the camera’s default ip is 192.168.0.100. We need to change our pc’s network setting first in order to connect t...

  • Page 18

    - page 18 - iii) chooses internet protocol (tcp/ip), and then click properties iv) chooses use the following ip addresses, field, and input ip address with 192.168.0.139, subnet mask with 255.255.255.0, and then click ok..

  • Page 19

    - page 19 - v) verify the on-line status of your surveillance camera. Please follow the procedure bellows a) start programÆ accessories Æ command prompt .A dos command shell screen will appear and shows "c:\>". B) type ipconfig and press enter. C) check if you can get the response from surveillance ...

  • Page 20

    - page 20 - i) launches microsoft internet explorer and type url: http://192.168.0.100, then you shall see the home page like bellows. Ii) the default username/ password is admin / admin, after you login to web you can get the video and find the system version on the lower-left corner for the very f...

  • Page 21

    - page 21 - click the install button to start installation of decoder plug-in. The live video will be displayed on ie after the plug-in automatically installed. In some case, your local pc may turn on the firewall option and the following warning message will pop up. Remember to click unblock to all...

  • Page 22

    - page 22 - note: in order to turn off the firewall protection, you can refer to control panel Æ windows firewall Æ general and turn off the windows firewall and permit the in-coming network packets (audio or video media packets).

  • Page 23

    - page 23 - otherwise, you can discriminately allow specific application and automatically unblock the firewall protection. You can check current firewall protection option of your network setting. If the network connection icon comes with a lock sign, that means the network interface is firewall pr...

  • Page 24

    - page 24 -.

  • Page 25: Restore to Factory Default

    - page 25 - restore to factory default if the system is up and running, you can push factory default button through pinhole of surveillance camera (marked as restore default, the reset is used to perform a warm system reboot). The firmware will recover the setting to factory default.The following co...

  • Page 26: Installing Scan Utility

    - page 26 - installing scan utility the following procedures guide you through the steps of scan utility installation and operation: step 1 : visit winpcap and download winpcap version 3.1 from the website: http://www.Winpcap.Org/ step 2 : install winpcap version 3.1(installer for windows / winpcap_...

  • Page 27

    - page 27 - iv) click finish to complete installation. Step 3 : launch scan utility and assign new ip address to surveillance camera.

  • Page 28

    - page 28 - i) double click the scan utility iiap.Exe ii) click scan button to send out scan packet to the lan. Iii) the found devices will be displayed on lower panel of utility program. The status field shows you whether the device is on line(configured in same subnet) or idle(not configured prope...

  • Page 29

    - page 29 - will accept your designated network setting and reboot itself to be effective right away. The default ip network mode will be changed to fixed ip mode after reboot(manually assigned by user’s). ☆ the standalone scan utility mentioned here can look up all the cameras in the same subnet(wi...

  • Page 30: Administrating From Webs

    - page 30 - administrating from webs login ach surveillance camera includes a web interface system. As long as you know the camera’s ip, you can launch ie and access the camera’s ip. Logon to the web server and the following login screen will appear: in above screen, user name and password are requi...

  • Page 31: Download Activex Control

    - page 31 - download activex control hen you use ie to connect the web first time, the system will ask you to download an active control. To download an activex control will take about one minute and the screen below will be displayed. Just press the “yes” button.To install... W.

  • Page 32: Overlook

    - page 32 - overlook hen the screen will appears as below: a a: menu: there are several items in the left column for you to choose: system, network, camera, user management, and system log. B: version information: will list for users to know the detail information as following. 9 system version 9 we...

  • Page 33: System

    - page 33 - system n following screen, you may see 3 different sheets for system, sip and other configuration and can be switched by mouse click to each tabs. System host name enter host camera name. Welcome text set your own welcome message in the login window. Date and time setting 1. You can choo...

  • Page 34: Sip

    - page 34 - sip sip phone name sip phone number ip camera sip port surveillance camera’s listen port for sip invite sip server sip server ip (optional) server port sip server listen port (optional) register timer sip server register timer (second) domain name domain name of sip server proxy domain p...

  • Page 35: Others

    - page 35 - others upgrade 1. Choose “kernel” or “ramdisk” to upgrade 2. Click “browse…” to choose a valid kernel or ramdisk. 3. Press “upgrade” to start upgrade. System reboot press "execute" button to perform a soft reboot reset data to factory default press "initial" button to enable this functio...

  • Page 36: Dido

    - page 36 - dido di enable enable device input device use di type select for rise or fall type of di(trigger edge). Im notify ip notify which ip address will be notified after di triggered . *smc will take action on behalf of this configuration . Im notify phone number notify which number will be no...

  • Page 37: Surveillance Password

    - page 37 - surveillance password enable password the password is saved for the privacy viewing of ipcam audio/video sources. If the option is enabled, client shall provide the password and being authenticated by ipcam. Input password password for saving privacy connection. Confirm password confirm ...

  • Page 38: Network Control

    - page 38 - network control n following screen, you may see 3 different sheets for ip, ftp and smtp configuration and can be switched by mouse click to each tabs. Ip dhcp dhcp mode for acquiring an ip from dhcp server static ip assign and arrange ip setting on your plan. Including the ip address / s...

  • Page 39: Ftp

    - page 39 - ftp server name ftp server ip or domain name login name login account for ftp server password login password for ftp server note: this setting is effective when a snapshot sending is triggered by surveillance camera..

  • Page 40: Smtp

    - page 40 - smtp server name smtp server ip or domain name login name smtp mail account password password for the smtp mail account send from sender information send to receiver email address send to the 2 nd receiver send to the 3 rd receiver mail title subject of the email mail message mail conten...

  • Page 41: Ddns

    - page 41 - ddns ddns client enable enable ddns client support . Ddns alias alias dns name ddns username ddns service account username ddns password ddns service password ddns uptimer ddns uptimer setting ddns fuptimer ddns fuptimer setting ddns system id system id of ddns, please use dyndns_dynamic...

  • Page 42: Rtp Port

    - page 42 - rtp port rtp port range form allow users to specify the rtp port range to send media stream from surveillance camera ☆ please consult it/mis staff before you make modification of this configuration..

  • Page 43: Camera

    - page 43 - camera camera resolution adjust the resolution of the image (restart required) bit rate control control the bandwidth automatically or manually bit rate control the available bandwidth manually. Frame rate choose the number of maximum frames to be sent by surveillance in frame per second...

  • Page 44: Encode Type

    - page 44 - encode type audio type configure audio encode type sent by surveillance camera. - g.711 a-law - g.711 mu-law video type configure video encode type sent by surveillance camera. - mpeg4 - h.263.

  • Page 45: Call to

    - page 45 - call to enable call assigned sip agent phone number automatically phone1 assigned sip phone number 1 phone2 assigned sip phone number 2 phone3 assigned sip phone number 3 source the call triggered source call timeout the seconds of call timeout.

  • Page 46: User Management Control

    - page 46 - user management control n following screen, administrators could add/modify/delete extra login accounts to manage/view the website contents . New user press new user button to add users edit edit user’s privilege control delete delete users set set user’s privilege control there are 3 le...

  • Page 47: System Info

    - page 47 - system info.

  • Page 48: System Log

    - page 48 - system log the system log book keeps system operating history in a cyclic way. The newest log record will over write the oldest log record..

  • Page 49: Install Netcam Smc

    - page 49 - use windows client for ip cam install netcam smc hile inserting the video surveillance software pack cd into the cd-rom , the program will self running with the following window . In above screen, netcam smc stands for surveillance management center, specially designed for the leadtek su...

  • Page 50

    - page 50 - press next for continuing the install process. Please read the eula carefully. Leadtek netcam smc is legally used for the leadtek surveillance products and well-protected by the copyright law. Press next for continuing the installation process..

  • Page 51

    - page 51 - click the button marked by red color and choose an installation folder or click next to stay the default installation folder to continue the installation process. Click the install to start the installation of netcam smc..

  • Page 52

    - page 52 - you will see the installation progress from the green progress bar. While finished, please press finish when installation is complete..

  • Page 53: Quick Launch

    - page 53 - quick launch you can click windows start->all programs->leadtek research inc->netcam smc- >netcam smc to launch the application. Otherwise you can click the netcam smc shortcut in desktop to launch the application. You will see the follow picture after you’ve launched netcam smc..

  • Page 54

    - page 54 - click the drop list which at the right-top corner, and then choice ‘auto scan’. It will display all cameras in the number list which have been connected to your network. Press ‘refresh’ button to connect those cameras which are showing in the number list..

  • Page 55

    - page 55 - you will see an ‘input password’ image to ask the camera password in each camera. Right-click and choose ‘input password’ context in the menu..

  • Page 56

    - page 56 - it will pop up an input box to ask the password of the camera. (the default password is: 12345) you will get the video and audio after you’ve inputted the correct password..

  • Page 57: Overview

    - page 57 - overview there are some functions in the top of screen. File: open records, system diagnostic, exit. View: captions setting: general setting, client sip setting window: change layout help: version number..

  • Page 58: Add Camera

    - page 58 - add camera click ‘add camera’ icon , and then the “scan camera” windows will pop up. Click ‘new group’ button to add a group name. E.G.: text click ‘scan’ button to capture any camera in the network. And then click to add the selected camera into ‘test’ group..

  • Page 59

    - page 59 - click ‘apply’ button and then you will see the ‘test’ group list like below. Click ‘refresh’ button, and then you will get the image..

  • Page 60: Add One More Group.

    - page 60 - add one more group. Of cause you call add as many group as you want. Modify camera’s connection setting. You can also modify the selected camera’s connection setting by clicking ‘modify’ button..

  • Page 61: Camera Connection Wizard

    - page 61 - camera connection wizard you can click ‘wizard’ button the connect cameras easily! 1. Please choose the connection mode 2. Fill in ip address, name, and password fields if you choose ‘peer-to-peer’..

  • Page 62

    - page 62 - 3. Fill in phone and password fields if you choose ‘through sip server’. P.S. Please be noticed that you mush configure ‘sip setting’ first if you want add a camera through sip server..

  • Page 63

    - page 63 - 4. Choose a group for the new camera. 5. Choose if the new camera behind a nat or not..

  • Page 64

    - page 64 - 6. You will get a new camera after the wizard was finish..

  • Page 65: Channel Management

    - page 65 - channel management the texts that show on the image’s left-top indicate the information: 2 : number 192.168.129.108 : ip address 565 kb : bandwidth 20 fps : bit rate. The icons that show on the image’s right-top corner mean: : re-connect : two-way audio : settings : recording : snapshot ...

  • Page 66: Change Channel Layout

    - page 66 - change channel layout you can change channel layout in the following way. E.G. Change to full screen by clicking the following button..

  • Page 67: Ptz Control

    - page 67 - ptz control navigation while the ptz models being selected, the navigation control panel can help users to do the manually control with the pan, tilt and zoom features. Symbol description control the direction of up-left control the direction of up control the direction of up-right contr...

  • Page 68: Preset

    - page 68 - preset presets are the position sets which users may pre-define the spots for the regular surveillance. Each preset can define its viewing angle and focus, a preset name is also included. If users already define a preset name, a tooltip will pop-up while user roll their mouse over the pr...

  • Page 69: Cruise

    - page 69 - cruise cruise is the set of presets; each cruise can contain 16 presets in it. If users did not define the cruise at the beginning, then the cruise button cannot be used press to sop the cruise..

  • Page 70: Auto Pan

    - page 70 - auto pan ptz ipcam is able to do the automatically pan with the lowest speed. This feature is designed for users can do the surveillance and move gently via the horizontal, visible angle of the ptz camera. To start the auto pan, press the button. While the auto pan has been activated, th...

  • Page 71: Device Setting

    - page 71 - device setting right-click a channel and choose ‘device..’ context in the menu. You can manual some factor of the video quality. Resolution adjust the resolution of the image (restart required) video mode control the bandwidth automatically(vbr) or manually(cbr) bit rate control the avai...

  • Page 72: Image Setting

    - page 72 - image setting right-click a channel and choose ‘image..’ context in the menu. Auto exposure adjust the auto exposure of the image for on/off. Auto white balance adjust the white balance of the onscreen image for on/off. Hue adjust the hue of the image. Saturation adjust the color saturat...

  • Page 73: Network Setting

    - page 73 - network setting right-click a channel and choose ‘network..’ context in the menu. Dhcp dhcp mode for requiring an ip from dhcp server fixed ip user can configure their prefer ip. Including the ip address / subnet mask / default gateway / primary dns / secondary dns settings pppoe especia...

  • Page 74: Motion Detect Setting

    - page 74 - motion detect setting right-click a channel and choose ‘motiondetect..’ context in the menu. 9 sensitivity this parameter determines the sensitivity of embedded motion detector algorithm. 9 area of detection : define the area ; 3 areas , each needs to be defined separately 9 e-mail setti...

  • Page 75: Dido Setting

    - page 75 - dido setting right-click a channel and choose ‘dido..’ context in the menu. 9 di / enable: on/off for di 9 di / type: rise edge / fall edge for trigger mode. 9 di / server action: define what action will be done if di triggered. 9 do / type: normal open / close open for action mode..

  • Page 76: Camera Information

    - page 76 - camera information right-click a channel and choose ‘camera info..’ context in the menu. You can see some camera information in this popup window..

  • Page 77: Preset Setting

    - page 77 - preset setting right-click a channel and choose ‘preset..’ context in the menu. - there are 16 presets for users to do the presets. - click the drop list the preset and start the preset navigation adjustment (view angle and the focus adjust), the preset name can be also added in at this ...

  • Page 78: Cruise Setting

    - page 78 - cruise setting right-click a channel and choose ‘cruise..’ context in the menu. The way to define the cruise will count on a process which start with the cruise set (a, b, c, d and e) the duration here defines the pause time between 2 presets for users to watch/monitor the preset more cl...

  • Page 79: Trigger Do

    - page 79 - trigger do right-click a channel and choose ‘trigger do..’ context in the menu. You can trigger do device by clicking the menu text..

  • Page 80: Open Record Files

    - page 80 - open record files click menu->file->open… you can filter records by camera, record type, and date. Just press ‘view’ button to play the selected record..

  • Page 81: Using Camera With A Router

    - page 81 - using camera with a router if users connect their own surveillance camera and / or pc to a router to access internet, the router automatically assign ip address to each device. Those ip addresses assigned by the router are under private ip address range (depicted in the following figure)...

  • Page 82

    - page 82 - internet access subscription no yes ip address assigned by router(dhcp) no pppoe / fixed ip direct internet connection yes assign surveillance camera with fixed ip / pppoe( public ip address ) manually configure surveillance camera with fixed ip( arranged by users ) install surveillance ...

  • Page 83

    - page 83 - i. Sip and stun option on smc: sip option: if you are making an sip proxy connection to surveillance camera, make sure you have already configured sip proxy setting of smc itself. The sip proxy setting can be modified from advance setting Æ other . Make sure using sip server option is on...

  • Page 84

    - page 84 - note : for sip phone / sip server / sip port / stun server / stun port / stun enable hb parameter settings, you can contact voip service provider and subscribe a account to use. Please contact ipcamfae@leadtek.Com.Tw for further detail. The following snapshot is just an example setting f...

  • Page 85

    - page 85 - note : the example snapshot is just an example. You shall input the setting of your pppoe account given by your isp. C. Without internet access( arranged by users ): if you have no internet access link, they can manually configure their networking device and make sure each device ip addr...

  • Page 86

    - page 86 -.

  • Page 87: Firmware Upgrade

    - page 87 - firmware upgrade surveillance camera firmware can be upgraded via microsoft internet explorer. Prepare the firmware file and follow the procedure as the following: 1) login on to web, and click system Æ others page. 2) ensure ramdisk radio button is selected. Click browse button to choos...

  • Page 88: Frequently Asked Questions

    - page 88 - 4) the surveillance camera rolls back its configuration to factory default when this procedure is done. Note: depends on firmware version to be upgraded, surveillance camera may reboot itself with factory default or maintain its original setting. Note: check the nsc3615 led to ensure the...

  • Page 89

    - page 89 - the following figure is an example. Justify your network access point(user pc a /b/c) l ea dte k l iv e d em o co rpo rat e / ho m e l a n user pc c 2 nat: ( ip: 172.16.0.62 ) internet nsc3615 ( ip: 220.128.22.97 ) nat router ( global ip : 211.72.242.91 ) ( private ip : 192.168.0.1 ) use...

  • Page 90

    - page 90 - z 0.0.0.0 : invalid ip address if you have direct internet access(e.G. Ip address 61.128.30.57) without an firewall or nat router installed, you possibly can directly link to leadtek ipcam live demo site(ip address : 220.128.220.97, etc on the figure above) and get a real-time live view....

  • Page 91

    - page 91 -.

  • Page 92: Sip Configuration

    - page 92 - sip configuration category : smc / configuration / general question: how to verify sip connection mode for a/v transmission in nsc3615(peer-to-peer or sip proxy) ? How do i configure sip connection mode on smc? Answer: smc supports 2 mode of sip connection, i.E. Peer-to-peer or via sip p...

  • Page 93: Motion Detection

    - page 93 - motion detection category : smc / operation / general question: how do i configure the motion detection of ipcam ? Answer: configure motion detection from “advanced setting”Æ”motion detection”Æ”area 1” use the mouse to make the selection of motion detection block and apply the “enable” r...

  • Page 94

    - page 94 - the rest of the setting determines what actions will be taken by smc(snapshot, record) or ipcam device(send snapshot by email or ftp, trigger do) when motion alarm triggered..

  • Page 95

    - page 95 - four parameters (sensitivity / object size / frame interval / alarm duration) need to configured before turning on the motion detection function. Z sensitivity: this parameter determines the sensitivity of embedded motion detector algorithm. The higher the value, the more sensible to the...

  • Page 96: Video Quality Setting

    - page 96 - z object size: this parameter determines the pixel change percentage of motion interest area. If more pixels(vs configured value) are justified and declared as changed by embedded motion detector algorithm, motion is reported by the device. Z frame interval: the frame interval check the ...

  • Page 97

    - page 97 - answer: the following configurable parameters have dominant effects on user video quality feeling: z video resolution z video mode z bit rate z frame rate z quality those parameters are closely linked and there is a tradeoff between setting of each parameters. For example, there is no gu...

  • Page 98

    - page 98 - qvga : 320 x 240 d1 : 702 x 480 the higher resolution configuration makes surveillance camera codec engine to pump out more bitstream data for reconstruction of image frame in windows client. 2) video mode leadtek surveillance camera supports 2 video mode for rate control, i.E. Variable ...

  • Page 99

    - page 99 - configuration setting: video resolution / video mode / bit rate / frame rate / video quality scene without moving object z cif / vbr / 256 k / 30fps / 4 running bitrate 214 k/ 28 fps z cif / vbr / 256 k / 30fps / 31 running bit rate 138k / 28 fps the blocked image will be observed on the...

  • Page 100

    - page 100 - scene with moving object z cif / cbr / 256 k / 30fps / 4 running bit rate 284k / 8fps the actual running frame rate is lower than 30 fps due to the constraint of available network bandwidth. Z cif / cbr / 256 k / 30fps / 31.

  • Page 101

    - page 101 - running bit rate 260 k / 16 fps the video quality is lower and thus the network bandwidth requirement is less. The side effect of this is the poor video quality (mosaic effect on moving object) z cif / vbr / 256 k / 30fps / 4 running bit rate 926 k / 28 fps the vbr setting ensures a bet...

  • Page 102

    - page 102 - z qcif / cbr / 256 k / 30fps / 4 running bit rate 231 k / 23 fps the viewable region is less than cif and network usage is also less. Z qcif / cbr / 256 k / 30fps / 31 running bit rate 54 k / 28 fps.

  • Page 103

    - page 103 - z qcif / vbr / 256 k / 30fps / 4 running bit rate 50 k / 28 fps the actual network bandwidth usage is less due to qcif resolution. Z qcif / vbr / 256 k / 30fps / 31 running bit rate 59 k / 28 fps.

  • Page 104: Bandwidth Usage

    - page 104 - the poor video quality setting make the text a little fuzzy. Bandwidth usage category : ipcam / connection / general question: what’s the network bandwidth requirement of each ipcam connection? How can i estimate or configure the video parameters to get a better video quality and perfor...

  • Page 105

    - page 105 - for example, your adsl network bandwidth is 512k/1m. The surveillance camera is installed in your home. That means your upstream bandwidth is 512kbps for your surveillance camera. Ensure your surveillance camera video mode is cbr so that you can better estimate the network usage. The su...

  • Page 106: Dynamic Domain Name Service

    - page 106 - dynamic domain name service category : ipcam / configuration / general question: how can i find out ipcam ip address if i my ipcam connect to internet via pppoe mode? Answer: please subscribe an account from www.Dyndns.Org and use the ddns client service in nsc3615 . You shall be able t...

  • Page 107

    - page 107 -.

  • Page 108: Factory Default Setting

    - page 108 - factory default setting category : / ipcam / installation / nsc3615 question: what's the factory default setting of nsc3615? How can i reset nsc3615 to factory default ? A answer: z nsc3615 factory defaut setting: fixed ip mode : ip address : 192.168.0.100 subnet mask : 255.255.255.0 de...

  • Page 109: Version Information

    - page 109 - push the button underneath(marked “restore default”) the pinhole at the bottom of nsc3615 case. Version information category : ipcam / installation / general question: how can i find out nsc3615 firmware version information and ethernet mac address? Answer: 1) log on to web server 2) re...

  • Page 110: Activex Control Download

    - page 110 - video decoder plug-in activex control download category : ipcam / operation / general question: how do i know the video nsc3615 video decoder is not installed in my local pc ? Answer:.

  • Page 111

    - page 111 - if the local pc does not install smc software or video decoder is not installed in the pc, the ie will pop up the message and ask user to download the activex control for the very first time. Activex control download indication : a) when a red cross appeared at the top-left hand corner ...

  • Page 112: Remove Old Activex Controls

    - page 112 - iii) go to the start menu, run dxdiag, click on the display tab, make sure directx is enabled(directx9). Remove old activex controls category : ipcam / operation / general question: how do i uninstall the old video decoder of nsc3615 ? 1. Launch internet explorer and click “internet opt...

  • Page 113

    - page 113 - 3. Click “view objects…” button. I. Select the item “csipctrlobject” and press “delete” key..

  • Page 114

    - page 114 - ii. Restart ie and login to web again, then you will be asked to install a new activex. Answer “yes” to download activex control again..

  • Page 115

    - page 115 - iii. Check your webpage setting and clarify the sip connection mode(peer-to-peer or proxy mode)..

  • Page 116: Bandwidth Configuration

    - page 116 - bandwidth configuration category : ipcam / connection / general question: what’s the network bandwidth usage in ipcam? How do i configure ipcam bandwidth setting properly? Answer: you can control the network bandwidth of each connection by web page. Please refer to webpage “camera” and ...

  • Page 117: Sip Connection Mode

    - page 117 - sip connection mode category : ipcam / configuration / general question: how do i configure nsc3615 sip connection mode on web? Answer: 1) peer-to-peer ensure the sip configuration : sip register is off ( select off and press “save”) 2) sip proxy mode.

  • Page 118: Codec Select

    - page 118 - ensure the “sip register” option is “on” and also check sip server ip address, sip port configuration are proper. Codec select category : ipcam / configuration / general question: can i select audio / video codec used in nsc3615? How to do it? Answer: nsc3615 supports multiple audio / v...