Leadtek TC-200 User Manual - page 3
Hardware
TC-200 has
• x86 CPU at 200 MHz
• 128Mb of SDRAM memory (8Mb dedicated for graphics controller)
• integrated accelerated 2D graphics controller
• 32 MB of “Flash Disk” for storing embedded Linux image and settings
• 10/100 BaseT Fast Ethernet connector
• PXE Boot ROM Agent
• 2 PS/2 ports for PS2 Keyboard and Mouse
• USB ports for USB printer or storage device
• Headphone and microphone connectorsSVGA monitor port
• No
moving
parts
Additional Features:
• External power adapter
Physical Features:
• Modeling
plastics
housing
• Dimensions: 133 mm x 63 mm x 111 mm
• Weight: 850 g with power supply
• The best video resolution is 1024 X 768 pixels @ 85 Hz and 16 bit colors. At lower resolutions also the
true-color setting is possible.
• TC-200 is powered by an external, agency approved power supply and the total power consumption is
under 10 watts.
Software
TC-200 was designed using the embedded Linux operating system, customized to the TC-200 hardware and
operational requirements. The complete software image resides in 32 MB of on-board flash disk. The functions
included in the TC-200 software are:
• Client supporting Microsoft RDP 5.1 (enables audio and true color forwarding from/to server)
• Citrix ICA Client version 6.3
• XDMCP viewer (enables audio forwarding from server)
• VNC server and view Samba service
• Desktop Terminal Shell for managing connections (enables multiple simultaneous connections and
switching between them)
• Setup utilities (Control panels, flash programmer etc.) Linux base components and drivers
• The TC-200 is able to boot Linux from on-board Flash Disk, or even boot from Diskless node by
build-in PXE (Pre-Execution Environment) boot agent this way creative users can build a very custom
TC-200 device, which can do more than just be a dumb terminal.
When TC-200 is running, it automatically connects to the network and tries to get an IP-address using the
Dynamic Host Configuration Protocol (DHCP). If a DHCP server is not available on the network, TC-200 can be
configured to use a fixed IP address and associated network settings. These are supplied by the user and
configured via the TC-200 setup utility along with other environment setup.