Tkp19q gps tracker for personal （gps+gsm+sms/gprs） user manual in order to install correctly and operate quickly, please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only, please see the appearance and color in...
● high-sensitivity, new workmanship and the most advanced gps chip ● can work effectively in limited space such as urban canyon ● low energy consumption ● fast signal acquisition ● support continuous positioning by gps and timed report by gprs; ● supports alarming and remote monitoring ● supports th...
Max. Altitude 18000m max. Speed 515m/s gravitational acceleration ﹤4g (2). Others operating temperature -20---65℃ humidity 5%---95% dimensions 38mm×38mm×14 mm (main unit) voltage rechargeable 450mah battery power supply dc5v standby time >48h buttons sos button for emergency aid. V . Waterproof cove...
Vi. Installation instructions 6.1 the preparing work before installation 6.1.1 please check whether the model is right and hardware accessories are complete when you received the product. If not, please contact your dealer as soon as possible. 6.1.2 choosing the type of the sim card is gsm card, ple...
Command setup is right, it will reply message: “set successfully”. If not, need setup again. If send query command, your mobile phone will reply corresponding information. 7.1 center number setup you need setup center no. First, if you need check monitor or other operations by message. The device on...
7.6 cancel sos call number if you want to cancel sos call number and don’t remember the serial number you set before, you can send query parameter condition message first to get the corresponding serial number. Secondly, you send cancel sos call number to the device. Command in form of sms through c...
If the setup is successful, the device will restart after 1min and no reply. 7.11 restore factory setup when sending incorrect command cause the device can’t work as normal, you can setup restore factory message to the device. Format: factory# if the setup is successful, the device will restore to b...
When you call the device by the set mobile phone no., the device will start monitor automatic. The caller will hear the voice from the device. When the calls are not from the set phone no., the device can’t be in the monitoring state. Format: monitor,00000000000# if the setup is successful, the devi...
