LeapFrog AM/FM+ - TERK - Radio Antenna Owner's Manual - Troubleshooting
15
Troubleshooting
Problem
No picture or sound
Interference: Noisy
picture or sound
LF-30S
Possible Solutions
Check that the power on/off switches on
both the receiver and transmitter are
both switched on.
Make sure the receiver and transmitter’s
power adapter cords are firmly inserted
into the units and into a power source.
Check that the power to all components
(DVD, VCR, TV etc.) in use connected
to the receiver and transmitter are all
turned on.
Make sure that the receiver and transmitter
are both set to the same channel.
Check to make sure that the TV is set to
the same channel (3 or 4) as the switch
on the bottom of the receiver.
Adjust the receiver and transmitter’s
antenna orientation.
Change the channels that the
transmitter and receiver are using.
If a microwave is on, turn it off.
Move a microwave from between the
path of the receiver and transmitter.
Unplug a 2.4 GHz telephone from an
electrical outlet.