Leba NoteSync Instructions Manual

Manual is about: NoteSync

Summary of NoteSync

  • Page 1

    Notesync instructions leba innovation a/s.

  • Page 2

    2 index notesync ........................................................................... 3 usb interface ..................................................................... 3 charging and synchronizing of 16 units ................................. 3 ventilation ...................................

  • Page 3

    3 notesync notesync is a unit designed for synchronizing and charging ipads, ipads ii, iphone or ipod´s. It is able to synchronize and charge up to 16 units simultaneously and units can be a mix of supported devices. The addition of the sync capability means that no longer do multiple users have to ...

  • Page 4

    Ventilation do not cover the ventilation holes on the unit ventilation holes must be kept free from obstruction. Connecting the unit to mains connect the mains cable to the unit as shown on the picture and can be connected to 100 changing the fuse the small compartment below the 230v connection chan...

  • Page 5

    5 connecting the master use a usb a->b cable to connect the master. Use the usb port on the notesync marked “master”. On/off button pressing the on/off button will turn the unit on or off. This switch will light green when the unit is on. If one of the led’s is flashing - wait until it lights up con...

  • Page 6

    6 mode button sync mode pressing the mode button makes the notesync switch between three modes. Press the mode button and the green led will flash. After a few seconds flashing will stop. The green led shows that the unit is in sync mode. In this mode you can sync all units simultaneously. Simply st...

  • Page 7

    7 the reset button pressing the reset button will make the notesync reset on all ports auto function (not on all versions) the auto switch turns on/off auto mode. If auto mode is set to off, the mode button will be active and you can manually select. If auto function is set to on, the unit will auto...

  • Page 8

    8 advanced functions and configuration to be able to use advanced functions and configuration of the notesync connect a mac or a pc to the unit using the config port. This is not a standard usb port. A fdti cable must be used – can be ordered from your dealer. Configuring the notesync: 1. Connect th...

  • Page 9

    9 technical specifications and standard input: 100-240 vac/ 3,5a/ 50-60hz out: 5vdc/ 40a @ 180-264vac input out: 5vdc/ 32 a @ 85-180vac input fuse: 250v 4a fast high break tmax: 60 o c (derating above 50 o c) secondary is selv the unit is tested by an independent test house and applies to en 60950-1...

  • Page 10

    10

  • Page 11

    11 warranty notesync is covered by 2 years warranty covering labor and parts. Product must be returned to leba innovation for repair. Notice please be aware that warranty is void if seal is broken.

  • Page 12

    12 register product register product and get free support, news and free sw updates. Simply email these information’s to: notesync@leba-innovation.Com institution/firm contact name e-mail address notesync serial number or numbers date of purchase leba innovation gisselfeldvej 12a dk – 4690 haslev t:...