Lec ISU111 User Manual - Using Your Appliance
5
Using your appliance
Once you have installed your appliance in an appropriate location, follow the start up procedure below:
Leave the appliance to stand for 2-3 hours to allow the refrigerant to settle following installation and
cleaning. If the appliance has been transported horizontally it must be left to stand vertically for 12
hours before installation.
Plug the appliance into the socket.
Turn the thermostat to the required setting – a medium setting is usually suitable.
Leave the appliance empty and switched on for at least 4 hours before storing anything inside to allow a
sufficient temperature to be reached.
N.B. Regular turning off may shorten the life of the appliance.
USING YOUR APPLIANCE
The thermostat is located at the rear of the appliance.
To reduce the temperature inside the appliance, turn the thermostat towards 6 maximum.
To increase the temperature inside the appliance, turn the thermostat towards 1 minimum.
Depending on the ambient temperature of the room the appliance is in, you may need to adjust the
thermostat accordingly.
CONDITION/REASON
SETTING ADJUSTMENT
Refrigerator too cold
Adjust temperature control one setting lower
Refrigerator too warm
Adjust temperature control one setting higher
Freezer too cold
Adjust temperature control one setting lower
Freezer too warm
Adjust temperature control one setting higher