Lec TU55144W User Manual - page 14
of
17
TU55144W
Tools Required:Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
1) Remove the right top hingercover .
2) Remove the screws fixed the top-hinge with cross-slot screwdriver.
3) Replace the top-hinge and the top-door limit block and the door bearing bush to the other side.
A. Remove the nut with sleeve.Take off the washer then remove the axes to the other side and fixed.
B. Remove the door limit block
Right top hinger cover
Screw (two)