1. DL manuals
  2. Leckey
  3. Wheelchair
  4. Everyday Activity Seat
  5. User Instructions

Leckey Everyday Activity Seat User Instructions

Summary of Everyday Activity Seat

  • Page 1

    User instructions everyday activity seat.

  • Page 3

    Contents 01 intended use 02 declaration of conformity 03 terms of warranty 04 product history record 05 product training 06 safety information 07 how to unpack and assemble 08 fitting the cushions 09 clinical setup for postural management 10 frequent adjustments for daily use 11 cleaning and care in...

  • Page 4

    1. Intended use the everyday activity seat comes in 3 sizes catering for the needs of children with disabilities. As a guide, size 1 is for kids aged 1-6, size 2 is for 5-12 years, and size 3 is for 11-18 years with a maximum user weight of 30kgs (110lbs), 50kgs (132lbs), and 100kgs (220lbs) respect...

  • Page 5: 6 Safety Information

    6.1 always read instructions fully before use. 6.2 users should not be left unattended at any time whilst using leckey equipment. 6.3 only use leckey approved components with your product. Never modify the product in any way. Failure to follow instructions may put the user or carer at risk and will ...

  • Page 6

    6.17 the product is designed for indoor use and when not in use should be stored in a dry place that is not subjected to extremes of temperature. The safe operating temperature range of the product is +5° to +40° celsius..

  • Page 7: How to

    How to unpack and assemble 7 check parts congratulations on purchasing your everyday activity seat. All of the parts ordered will be contained in polythene bags with each one clearly labelled. Carefully remove them from the boxes and check all of the parts you have ordered. Keep polythene bags away ...

  • Page 8: 7.1 Attaching The Sandals/

    7.1 attaching the sandals/ attaching the footplate straps (wooden footplate accessory) to attach the sandals simply unscrew the knob and washers from the sandal. Place the sandal onto the footplate positioning the screw through the slot and replacing the washers and knob. Repeat this for the other s...

  • Page 9: 7.2 Attaching The Armrests

    7.2 attaching the armrests insert the armrest into the receiving bracket and secure at the desired height by tightening the knob (a). A.

  • Page 10: 7.3 Attaching The Tray

    7.3 attaching the tray to attach the grey, clear or black tray, insert the tray tubes through the centre of the armrests (a). To insert the wooden tray, insert the single tray tube into the centre of the right or left armrest depending on position required (b). Once the tray is located in position (...

  • Page 11: 7.4 Attaching The

    7.4 attaching the hip laterals unscrew the knob (a) from underneath the seat base. Place the hip lateral bracket onto the screw (b). Replace and tighten the knob (c). A b c 7.5 attaching the standard and flipaway chest lateral supports to attach the chest lateral supports, line the bracket up with t...

  • Page 12: 7.7 Attaching The

    7.7 attaching the pommel insert the pommel bracket into the recess, insert the knob (a) and tighten. A 7.6 attaching shoulder protraction pads to attach the shoulder protraction pads, line the bracket up with the slots in the backrest. Insert the 2 allen key bolts and washers through the backrest sl...

  • Page 13: 7.8 Attaching The

    7.8 attaching the footplate for size 1 and 2, slide the footplate over the calf angle tube (a) and tighten bolt (b). For size 3, slide the footplate tubes over the calf angle support tubes (c) and tighten bolts on each calf support (d). C d b a.

  • Page 14: 7.9 Attaching The

    7.9 attaching the abduction side pads for size 1 and 2, with the seat in the maximum depth position, unscrew the knob from under- neath the seat base. Place the abduction side pad bracket onto the screw (a) then replace and tighten the knob (b). For size 3, line up the abduction side pad bracket wit...

  • Page 15: 7.10 Attaching The Pelvic

    7.10 attaching the pelvic harness a open each camlock (a). Attach each of the 4 straps through the camlocks and continue to feed through to additional security triglide (b) then snap shut (c). B b c.

  • Page 16: 7.11 Attaching The Mygo

    7.11 attaching the mygo headrest attachment bracket thread screws through the mygo headrest attachment bracket and spacer block. Align the assembly with the holes in the back plate and push through. Secure each end with bolt - tighten to secure. B a.

  • Page 17: 7.12 Attaching The Calf

    7.12 attaching the calf strap wrap the calf strap around the 2 calf support bars. Align the poppers on the velcro strip and secure. Once secured, slide the poppers around the back of the calf support struts to protect the user’s legs. B a.

  • Page 18: 7.13 Attaching The Push

    7.13 attaching the push handle for size 1, the push handle is attached to the chassis brackets by inserting the two lower stems into the receiving tubes as shown (a). For size 2 and 3, the push handle is attached to the seat base by inserting the two lower stems into the receiving tubes as shown (b ...

  • Page 19

    C b d e.

  • Page 20: Fitting The

    Fitting the cushions 8.

  • Page 21: 8.1 Backrest Cushion

    8 8.1 backrest cushion the backrest cushion can be attached by simply setting it onto the backrest, then pressing down to locate the snap fasteners at the top. Secure it to the velcro on the backrest. Next, loop the appropriate piece of elastic length over the hook- there are 2 elastic lengths to ch...

  • Page 22: 8.3 Chest Lateral

    8.3 chest lateral support covers to attach the chest lateral support covers, simply slide the covers on the lateral support, with the zips on the outside. Feed the plastic buckle through the slot in the cover (a), then pull the zips located at the rear of the cover together to close (b). B a 8.2 sea...

  • Page 23: 8.5 Hip Lateral Bracket

    8.5 hip lateral bracket cover slide the cover around the bracket until it covers the angle adjustment mechanism, pull the tab over the top of the angle adjustment and press the snap fastener. 8.4 hip laterals slide the covers over the hip lateral hardware with the zips on the outside (a). Pull the z...

  • Page 24: 8.6 Contoured

    8.6 contoured head support cover for size 1 and 2 contoured head support, slide the bracket into the pockets of the cover and secure poppers to close. (1) for size 3, place the cover over the head support and zip closed to secure. (2) 8.7 chest harness the chest harness can be attached by clipping t...

  • Page 25: 8.8 Attaching The

    8.8 attaching the trunk harness with your trunk harness you will receive two adjustable side straps, two adjustable shoulder straps, four camlock attachment clips (two with webbing straps attached, two without), two countersunk bolts, two button head bolts and four locking nuts. Attach the shoulder ...

  • Page 26: Clinical Setup

    The clinical setup of the product should be completed by a technically and clinically competent person who has been trained in the use of the product. Leckey recommend that a written record is maintained of all clinical setups for this product. Set the backrest height, seat depth and footplate heigh...

  • Page 27: 9.1 Pelvic Harness

    9 9.1 pelvic harness for side adjustment, open the camlocks and either pull the straps to tighten or feed the straps through to loosen, depending on fit required (a). To adjust in the centre pull the d ring from the velcro and feed strap through buckle on either strap to loosen the belt or pull d ri...

  • Page 28: 9.3 Backrest Height

    9.3 backrest height the overall height of the backrest can be adjusted by loosening the two knobs, then positioning to the shoulder height of the user. Once in position the knobs should be retightened securely. The height can be fine tuned when the user is in the seat. When the height is lowered the...

  • Page 29: 9.4 Backrest Angle

    9.4 backrest angle the backrest can be angled by loosening the bolt (a) using a multi tool. Select the position you require then retighten the bolt securely. Always ensure the back angle is secure to maintain the desired posture for the child. The backrest angle can be adjusted with the child in the...

  • Page 30: 9.5 Seat Depth

    9.5 seat depth to adjust the seat depth simply loosen the knobs (a) on the underside of the seat base, pull the seat base towards you until the required seat depth has been achieved and tighten the knobs securely. 9.6 footplate height to set the height of size 1 and 2 footplate, loosen the bolt (a) ...

  • Page 31: 9.7 Footplate Angle

    9.7 footplate angle to set the angle of the size 1 and 2 footplate, loosen the ratchet handle (a) set to the required angle and retighten the handle. For size 3 loosen the bolt (b), set to the required angle and retighten the bolt. Always use caution to ensure fingers do not become trapped when adju...

  • Page 32: 9.9 Chest Lateral Supports

    9.9 chest lateral supports loosen the allen bolts (a) to adjust the width, height and angle of the lateral supports and retighten when you have achieved the desired position. To move the flipaway laterals, use knob (b). 9.10 chest harness to change the width of the chest harness, lift the front cove...

  • Page 33: 9.11 Trunk Harness

    9.11 trunk harness the trunk harness will be open but remain attached by side clip (a). When placing the child in the seating system bring the trunk harness across the front and attach by connecting the clip into the buckle on the other side (b). All of the connecting straps are adjustable. 9.12 san...

  • Page 34: 9.13 Attaching The

    Slide the webbing through the slot in the sandal. Loop the webbing back up and through the bottom of the triglide. Then pass the webbing through the top of the triglide. Finally to lock the webbing in place, pass it through the bottom of the triglide again. Trim strap to required length. 9.13 attach...

  • Page 35: 9.14 Shoulder Support

    9.14 shoulder support to adjust the height of the shoulder support, loosen the allen bolts, move the shoulder support bracket to the required height and retighten the bolts. 9.15 head support to adjust the height and depth of the size 1 and 2 head support, loosen the hand knobs (a) and when set to t...

  • Page 36: 9.16 Armrest Adjustment

    9.16 armrest adjustment to adjust the height of the armrest, loosen the hand knob (a), set to the desired height and retighten. To adjust the angle, rotate ratchet handle (b) until the desired position has been achieved. 9.17 tray adjustment the height and angle of the tray are set by adjusting the ...

  • Page 37: Frequent

    Parents and carers should be shown how to make frequent adjustments and be made aware of the safety checks in section 6 by a technically and clinically competent person who has been trained in the use of the product. Leckey recommend that a written record is maintained of all parents and carers who ...

  • Page 38: 10.1 Transferring Your Child

    10.1 transferring your child into and out of the seat 10.2 adjusting the pelvic harness before transferring the child into the seat carry out the daily product inspection as outlined in section 12 of this user manual. Adjust the seat to a comfortable height to facilitate transfer. Lock all the casto...

  • Page 39: 10.3 Chest and Trunk

    If the child is active or has extensor spasms check the pelvic harness is secure after each spasm to ensure the child is safe and cannot slide forward in the seat. Always fasten the centre buckle on the pelvic harness before making any other adjustments. 10.3 chest and trunk harness adjustment if th...

  • Page 40: 10.5 Height Adjustment

    10.5 height adjustment – hi-low chassis you can carry out this adjustment with the user in the chair. To adjust the height of the hi-low chassis press the foot lever at the rear of the chassis whilst holding the push handle. Once you remove your foot from the pedal the seat will be fixed at the chos...

  • Page 41: 10.6 Height Adjustment

    If the footplate has been set to the lowest position and the height of the hi-low chassis has been adjusted to the lowest position, you might find there is a clash with the castors and the footplate. To prevent this clash, turn the front castors around so the directional locks are facing backwards a...

  • Page 42: 10.7 Height Adjustment -

    10.7 height adjustment - hi-low hydraulic chassis 10.8 height adjustment - hi-low powered chassis you can carry out this adjustment with the user in the chair. To adjust the height of the hi-low chassis use a pump action on the foot lever at the rear of the chassis whilst holding the push handle. On...

  • Page 43: 10.9 Tilt In Space

    10.9 tilt in space the tilt in space can be angled while the user is in the seat. Before you adjust the tilt in space angle of the seat always ensure the pelvic harness is secured preventing the user from sliding forward in the seat. To adjust the tilt angle press the lever under the seat base. Once...

  • Page 44: 10.10 Sandals

    10.10 sandals to position the user’s feet in the sandals secure the velcro straps provided so the foot is held in place. The straps should be placed over the bridge of the foot and over the toes. If the child is wearing sandals or light footwear check the straps to make sure the webbing does not irr...

  • Page 45: 10.12 Armrest Adjustment

    10.12 armrest adjustment to adjust the height of the armrest loosen the hand knob (a) set to the desired height and retighten. To adjust the angle rotate ratchet handle (b) until the desired position has been achieved. Do not place hot objects, greater than 40 degrees celsius on the tray. Please not...

  • Page 46: 10.13 Using The Flip-Up

    10.13 using the flip-up footplate to raise the footplate, lift up from the front (a). When fully upright the pull pin will lock automatically. To lower the footplate pull the pull pin out (b) and push the footplate down. It is possible to keep the footplate unlocked by twisting the pull pin once you...

  • Page 47: 11 Cleaning & Care

    11 cleaning & care information how to maintain when cleaning we recommend that you use only warm water and a non-abrasive detergent. Never use organic solvents or dry cleaning fluids. Upholstery and fabrics 1. The cushion covers in the soft fabric option can be removed and machine washed at 40°c how...

  • Page 48: 12 Daily Product Inspection

    12 daily product inspection (therapists, parents & carers) we recommend that daily visual checks of the equipment are carried out by therapists, carers or parents to ensure the product is safe for use. The recommended daily checks are detailed below. 1. Ensure all adjustment knobs and bolts are in p...

  • Page 49: 13 Annual Product

    13 annual product inspection (therapist, technician, leckey product advisor, dealer) leckey recommend that each product should be subject to a detailed inspection at least once a year and every time the product is reissued for use. This inspection should be carried out by a technically competent per...

  • Page 50: 14 Reissuing Leckey

    14 reissuing leckey products most leckey products are assessed and ordered to meet the needs of an individual user. Before reissuing a product we recommend that the therapist prescribing the product has carried out an equipment compatibility check for the new user and has ensured that the product be...

  • Page 51: 15 Product Servicing

    15 product servicing servicing of all leckey products should only be carried out by technically competent persons who have been trained in the use of the product. In the uk & roi please contact the leckey service centre on uk 0800 318265 or roi 1800 626020 and our customer service department will be...

  • Page 52: 16 Technical Information

    16 technical information all international service enquiries should be directed to the appropriate leckey distributor who will be delighted to assist you. For further information on leckey distributors please visit our website. Www.Leckey.Com 1 size 3 2 50kg 27kg 34kg 450-600 320-600 260-380 230-380...

  • Page 53: Accessories

    Accessories chassis 151-6100 size 1 seat base, backrest and basic chassis with gas spring and 100mm castors -black 151-6200 size 2 seat base, backrest and basic chassis with gas spring and 100mm castors -black 151-7200 size 2 extended seat base, backrest and basic chassis with gas spring and 100mm c...

  • Page 54

    Cover packs 151-6104-01 size 1 cushions and covers - green base (with sacral foam spacer pads) 151-6104-03 size 1 cushions and covers - blue base (with sacral foam spacer pads) 151-6104-04 size 1 cushions and covers - raspberry base (with sacral foam spacer pads) 151-6104-05 size 1 cushions and cove...

  • Page 55: Head Support Accessories

    151-6304-05 size 3 cushions and covers - ebony grey base (with sacral foam spacer pads) 151-6304-01vin size 3 cushions and covers - green base (with sacral foam spacer pads) 151-6304-03vin size 3 cushions and covers - blue base (with sacral foam spacer pads) 151-6304-04vin size 3 cushions and covers...

  • Page 56

    151-6209-05vin flat headrest lateral assembly and cover -ebony grey (only available with 01vin, 07vin & 04vin cushion packs) 151-6209-07vin flat headrest lateral assembly and cover -black (only available with 03vin cushion packs) 151-1756 mygo headrest attachment bracket chest support accessories 15...

  • Page 57

    151-6306-01 s3 rigid pu chest laterals pair (green cover )-black metalwork 151-6306-03 s3 rigid pu chest laterals pair (blue cover )-black metalwork 151-6306-04 s3 rigid pu chest laterals pair (raspberry cover )-black metalwork 151-6306-05 s3 rigid pu chest laterals pair (ebony grey cover )-black me...

  • Page 58

    151-6212-04vin s2 flip away pu chest laterals pair (raspberry cover )-black metalwork 151-6212-07vin s2 flip away pu chest laterals pair (black cover )-black metalwork 151-6213-01 s2 flip away pu chest laterals pair (green cover )-white metalwork 151-6213-03 s2 flip away pu chest laterals pair (blue...

  • Page 59

    151-6215 size 2 complex flipaway laterals pair - white metalwork 151-6311 size 3 complex flipaway laterals pair - white metalwork 151-6111-01 size 1 basic laterals pair (green cover included)-black metalwork 151-6111-03 size 1 basic laterals pair (blue cover included)-black metalwork 151-6111-04 siz...

  • Page 60

    151-6312-01vin size 3 basic laterals pair (green cover included)-black metalwork 151-6312-03vin size 3 basic laterals pair (blue cover included)-black metalwork 151-6312-04vin size 3 basic laterals pair (raspberry cover included)-black metalwork 151-6312-07vin size 3 basic laterals pair (black cover...

  • Page 61

    151-6114-04 size 1 side pads cover pair (raspberry) 151-6114-05 size 1 side pads cover pair (ebony grey) 151-6114-01vin size 1 side pads cover pair (green) 151-6114-03vin size 1 side pads cover pair (blue) 151-6114-04vin size 1 side pads cover pair (raspberry) 151-6114-07vin size 1 side pads cover p...

  • Page 62

    151-6222-01 size 2 side pads pair (green cover included)-black metalwork 151-6222-03 size 2 side pads pair (blue cover included)-black metalwork 151-6222-04 size 2 side pads pair (raspberry cover included)-black metalwork 151-6222-05 size 2 side pads pair (ebony grey cover included)-black metalwork ...

  • Page 63

    151-6225-01 size 2 abduction side pad (green cover included)-white metalwork 151-6225-03 size 2 abduction side pad (blue cover included)-white metalwork 151-6225-04 size 2 abduction side pad (raspberry cover included)-white metalwork 151-6225-05 size 2 abduction side pad (ebony grey cover included)-...

  • Page 64

    151-6122 s1 tray wooden flipaway 151-6231 s2 tray wooden flipaway 151-6326 s3 tray wooden flipaway 151-1644 s1 tray plastic 151-2644 s2 tray plastic 133-2148 tray assembly (extended armrest clear) 133-2149 tray assembly (extended armrest black) 151-3766 tray assembly clear (additional 20mm seat widt...

  • Page 65

    Other accessories 151-6117 size 1 armrest (pair) 151-6226 size 2 armrest (pair) 151-3747 size 3 armrest (pair) 151-6124 size 1 armrest (pair) white 151-6234 size 2 armrest (pair) white 151-6328 size 3 armrest (pair) white 151-6118-01 size 1 disc pommel (green)-black metalwork 151-6118-03 size 1 disc...

  • Page 66

    151-6322-01 size 3 disc pommel (green)-black metalwork 151-6322-03 size 3 disc pommel (blue)-black metalwork 151-6322-04 size 3 disc pommel (raspberry)-black metalwork 151-6322-05 size 3 pommel disc (ebony grey)-black metalwork 151-6322-01vin size 3 disc pommel (green)-black metalwork 151-6322-03vin...

  • Page 67

    151-6230-01 wedge shape pommel s2 (green)-white metalwork 151-6230-03 wedge shape pommel s2 (blue)-white metalwork 151-6230-04 wedge shape pommel s2 (raspberry)-white metalwork 151-6230-05 wedge shape pommel s2 (ebony grey)-white metalwork 151-6230-01vin wedge shape pommel s2 (green)-white metalwork...

  • Page 68

    24 hour postural care for babies, kids & adults. Sleeping, sitting, standing, walking, moving, bathing, toileting. Leckey 19c ballinderry road lisburn bt28 2sa northern ireland united kingdom t: 028 9260 0750 e: info@leckey.Com w: www.Leckey.Com ls331-04.