LeCroy MXs-A Specification - page 10

Page of 12

Download

Print this page

Bookmark us

WAVESURFER Xs-A SPECIFICATIONS

WaveSurfer

24Xs-A

44Xs-A

42Xs-A

64Xs-A

62Xs-A

104Xs-A

Bandwidth (@ 50

Ω)

200 MHz

400 MHz

600 MHz

1 GHz

Rise Time

1.75 ns

875 ps

500 ps

300 ps

Input Channels

Display

10.4" Color flat-panel TFT-LCD, 800 x 600 SVGA, touch screen

Sample Rate (single-shot)

2.5 GS/s

(5 GS/s Interleaved)

Sample Rate (RIS mode)

50 GS/s

Standard Record Length

5 Mpts/Ch (all channels)

Standard Capture Time

Up to 2 ms at full sample rate on all four channels

Vertical Resolution

8-bits

Vertical Sensitivity (V/div)

2 mV/div–10 V/div (1 M

Ω); 2 mV/div–1 V/div (50 Ω)

Vertical (DC Gain) Accuracy

±1.0% of full scale (typical); ±1.5% of full scale

≥ 10 mV/div (warranted)

BW Limit

20 MHz

20 MHz, 200 MHz

Maximum Input Voltage

Ω: 5 V

rms

, 1 M

Ω: 400 V max.

Ω: 5 V

rms

(DC + Peak AC

≤ 5 kHz)

1 M

Ω: 250 V max.

(DC + Peak AC

≤ 10 kHz)

Input Coupling

AC, DC, GND (DC and GND for 50

Ω)

Input Impedance

1 M

Ω || 16 pF, or 50 Ω

1 M

Ω || 20 pF,

or 50

Ω

Probing System

BNC or ProBus

Probes

One PP009 (5 mm) per channel (standard)

One PP011 (5 mm)

per channel

(standard)

Timebase Range

200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div)

Timebase Accuracy

≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @ 5–40 °C)

Trigger Modes

Normal, Auto, Single, and Stop

Trigger Sources

Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)

Trigger Coupling

DC, AC, HFRej, LFRej

Pre-trigger Delay

0–100% of full scale

Post-trigger Delay

0–10,000 divisions

Trigger Hold-off

1 ns to 20 s or 1 to 1,000,000,000 events

Internal Trigger Level Range

±4.1 div from center

External Trigger Range

EXT/10 ±4V; EXT ±400 mV

Triggering

Standard

Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV – 720p, 1080i, 1080p)

Measure, Zoom, and Math Tools

Standard Parameter

Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base

Measurements

(Low), Delay, Duty, Fall Time (90%-10%), Fall Time (80%-20%), Frequency, Maximum, Mean, Minimum,

Overshoot+, Overshoot-, Period, Peak-Peak, Phase, Rise Time (10%-90%), Rise Time (20%-80%), RMS, Skew,

Standard Deviation, Top (High), Width+, Width-. Measurements can be gated.

Zooming

Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.

Standard Math

Operators include Sum, Difference, Product, Ratio, and FFT (up to 25 kpts with power spectrum

output and rectangular, VonHann, and FlatTop windows). 1 math function may be defined at a time.

Physical

Dimensions (HWD)

260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")

Net Weight

7.26 kg. (16.0 lbs.)

Options

Advanced (WS Xs-ADVTRIG)

Runt, Slew Rate, Interval (Signal or Pattern), Dropout, Qualified (State or Edge)

Extended Math

Adds the following additional math functions: Absolute Value, Averaging (summed and continuous), Derivative,

(WSXs-MATHSURF Option)

Envelope, Enhanced Resolution (to 11-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units),

Roof, Square, and Square Root. Also adds chaining of two math functions and 1 Mpts FFTs.

« ‹ Prev 6 7 8 9 10 11 12 Next › »

Summary of MXs-A

Page 1
Wavesurfer ® xs-a and mxs-a oscilloscopes 200 mhz – 1 ghz engineered for efficient design and debug.
Page 2
2 essential tools for validation and debug essential tools for validation and debug wavesurfer ® xs-a • 200 mhz, 400 mhz, 600 mhz and 1 ghz bandwidths • 2.5 gs/s sample rates per channel, up to 5 gs/s with ws 104xs-a • 5 mpts/ch memory • fast processing of long memory and math • responsive user inte...
Page 3
Embedded controller design and debug save time when working with embedded controllers by adding high-performance mixed signal capability to the wavesurfer. Capture digital signals up to 500 mhz with up to 50 mpts/ch memory, 2 gs/s and 18 or 36 channels. Quickly and easily isolate specific serial dat...
Page 4
The new wavesurfer xs-a oscilloscope makes everyday testing simpler and easier. The intuitive user interface and streamlined front panel make it easy to turn on the oscilloscope and start making measurements. The interface is designed so that all the common measurements and functions are just one to...
Page 5
4. “push” knobs trigger level, delay, and offset knobs all provide shortcuts to common actions when pushed. 5. Zoom control knobs navigate zoom or math traces with the multiplexed horizontal knobs. 6. Lecroy wavestream fast viewing mode provides a lively, analog-like feel similar to a phosphor trace...
Page 6
6 lecroy wavescan advanced search since the scanning “modes” are not simply copies of the hardware triggers, the utility and capability is much higher. For instance, there is no “frequency” trigger in any oscilloscope, yet wavescan allows for “frequency” to be quickly “scanned.” this allows the user...
Page 7
7 embedded system design and debug successful design and debug of an embedded system requires monitoring a wide range of signals at any given time. The wavesurfer xs-a and mxs-a oscilloscopes can be made in to an all-in-one tool for capturing analog, digital and serial signals simultaneously. High-p...
Page 8
The wavesurfer m-type oscilloscope 8 10 ms y 2 n dy dx y y dy ydx 2 a b 10 ms y 2 n dy dx y y ydx a b higher sample rates, 10 mpts/ch memory, advanced math and triggering, enhanced fft capabilities and labnotebook make the wavesurfer m-type a truly unique oscilloscope. No other product in this class...
Page 9
9 probes, accessories, and options zs series high impedance active probes leading features: • 1 ghz (zs1000) and 1.5 ghz (zs1500) bandwidths • high impedance (0.9 pf, 1 m Ω) • extensive standard and available probe tip and ground connection accessories • ±12 vdc offset (zs1500) • lecroy probus syste...
Page 10
10 wavesurfer xs-a specifications wavesurfer wavesurfer wavesurfer wavesurfer wavesurfer wavesurfer 24xs-a 44xs-a 42xs-a 64xs-a 62xs-a 104xs-a bandwidth (@ 50 Ω) 200 mhz 400 mhz 600 mhz 1 ghz rise time 1.75 ns 875 ps 500 ps 300 ps input channels 4 4 2 4 2 4 display 10.4" color flat-panel tft-lcd, 80...
Page 11
Wavesurfer mxs-a specifications 11 wavesurfer wavesurfer wavesurfer wavesurfer 24mxs-a 44mxs-a 64mxs-a 104mxs-a bandwidth (@ 50 Ω) 200 mhz 400 mhz 600 mhz 1 ghz rise time 1.75 ns 875 ps 500 ps 300 ps input channels 4 display 10.4" color flat-panel tft-lcd, 800 x 600 svga, touch screen sample rate (s...
Page 12: Ordering Information
Local sales offices are located throughout the world. Visit our website to find the most convenient location. © 2010 by lecroy corporation. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested tra...