LeCroy WaveAce 202 Specifications - •
2
THE TOOLS AND FEATURES FOR ALL YOUR DEBUG NEEDS
Key Features
•
40 MHz, 60 MHz,
100 MHz, and 200 MHz
bandwidths
•
Sample rates up
to 2 GS/s
•
Long Waveform Memory
—up to 10 kpts/Ch
(20 kpts interleaved)
•
Advanced Triggering—
Edge, Pulse Width, Video,
Slope (Rise Time)
•
5.7" color display on all
models
•
32 automatic measurements
•
Multi-language User
Interface and Context
Sensitive Help
•
Large internal waveform
and setup storage
•
Four math functions plus FFT
•
USB host and device
connections for printers,
memory sticks and PC
remote control
A good oscilloscope should
simplify how you work and
shorten the time it takes to
find and debug problems.
The WaveAce™ combines
long memory, a color display,
extensive measurement
capabilities, advanced
triggering and excellent
connectivity to improve
troubleshooting and shorten
debug time. With bandwidths
from 40 MHz to 200 MHz,
sample rates up to 2 GS/s
and waveform memory
up to 10 kpts/Ch (20 kpts
interleaved) the WaveAce
exceeds all expectations of a
small affordable oscilloscope.
Digital Filter
Digital filtering is available on each
channel of the WaveAce. The Low-Pass,
High-Pass, Band-Pass and Band-Stop
filters allow you to isolate only the
frequencies you want to see.
Trigger
Edge triggering is not always the best
choice for every signal. Beyond the
basic edge trigger is a set of trigger
capabilities which include Pulse Width,
Video and Slope (Rise Time) triggers.
Long Capture and Zoom
Small, portable oscilloscopes often
suffer from short capture time due
to the small waveform memory. The
WaveAce is available in 4 kpts/Ch
and 10 kpts/Ch configurations which
is up two to three times more than
competitive products. More memory
results in longer capture times showing
more waveform detail with each trigger.
Activate the built-in zoom function
to take a closer look at the details.