100 series wireless microphone system system setup procedure rio rancho, nm, usa www.Lectrosonics.Com.
100 series lectrosonics, inc. Lm power led ucr100 power led lm uh400a use fresh alkaline or lithium 9 volt batter- ies. In all cases, observe large and small battery contact openings inside the unit and orient the battery accordingly prior to inserting in the battery compartment. Turn all transmitte...
Wireless microphone system rio rancho, nm rotate the 5-pin plug to align with the pins in the jack on the transmitter. Insert the plug until it latches in place. Press the black button to re- move the plug from the trans- mitter. The connector fits standard 3-pin xlr jacks. A spring- loaded collar o...
Output level control for cameras or mixers with manual level control attach a receiver output cable (see below) between the ucr100 and the camera or mixer. Leave the camera or mixer audio level control in the same position as set in step 7. While speaking into the transmitter microphone at the same ...
