Q uick s tart g uide fill in for your records: serial number: purchase date: this guide is intended to assist with initial setup and operation of your lectrosonics product. For a detailed user manual, down- load the most current version at: www.Lectrosonics.Com/manuals handheld transmitter hh 06 mar...
Lectrosonics, inc. 2 capsule and battery installation a common threaded mount allows the use of a variety of different capsules from different manufacturers. Capsules are attached with a right-hand thread a mic capsule is threaded onto the body of the transmitter in the direction shown. Do not overt...
Www.Lectrosonics.Com 3 controls and functions up/down buttons for menu item selection power button modulation leds enter menu and select item previous screen side button setup switch powering on press and hold the power button for several seconds until a countdown on the lcd is completed. The countd...
Lectrosonics, inc. 4 with the unit turned on, a brief push of the power button will reveal a menu al- lowing you to choose between resume, rf on?, and pwr off?. Use the up/ down buttons to select one of these menu items, then press the menu/sel button to confirm this action. Resume pwr off rf on? Ba...
Www.Lectrosonics.Com 5 freq. The operating frequency is normally determined using the scanning func- tion in the receiver or with coordination software. The frequency is shown on the transmitter lcd display in mhz and with a hexadecimal code that is used on most lectrosonics receivers. Gain freq. Pr...
Lectrosonics, inc. 6 backlgt the lcd includes a backlight that il- luminates the display for easier viewing in dim lighting conditions. It is set to come on when any button on the control panel is pressed, then stay on for either 30 seconds or 5 minutes, or to stay on all the time. Compat tuning txp...
Www.Lectrosonics.Com 7 4) speak or sing at the same voice level that will actually be used dur- ing the program, while observing the modulation leds. Use the up/ down buttons to adjust the gain until the –20 db led starts to flicker red and the –10 db glows green. 5) once the audio gain has been set...
® limited one year warranty the equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was purchased from an authorized dealer. This warranty does not cover equipment which has been abused or damaged by careless handling or shipping. This wa...
