- DL manuals
- Lectrosonics
- Speakers
- Long Ranger 4
- Instruction Manual
Lectrosonics Long Ranger 4 Instruction Manual
Summary of Long Ranger 4
Page 1
Long ranger 4 portable wireless sound system instruction manual rio rancho, nm, usa www.Lectrosonics.Com fill in for your records: serial number: purchase date:.
Page 2
Long ranger 4 lectrosonics, inc. 2 table of contents general technical description ................................................................................................................................................ 3 rechargeable batteries and external power sources .......................
Page 3
Portable wireless sound system rio rancho, nm 3 the built-in battery pack in the long ranger is charged by plugging the dcr15/2au charger into the jack labeled dcr15/2au charger on the control panel. Connect the charger into a standard 110 or 220 volt ac outlet. (the dcr15/2au charger can be operate...
Page 4
Long ranger 4 lectrosonics, inc. 4 controls and functions control panel wireless microphone volume turns unit power on and off and also functions as the volume control for the internal wireless receiver. Power a red led that lights when unit power is on. Rf a green led that lights when the companion...
Page 5
Portable wireless sound system rio rancho, nm 5 off rf 12v dc output charge until lamp goes out power aux in/out mic line wireless microphone volume auxiliary input volume mod level l o n g r a n g e r dcr15/2au charger use only fast charge circuitry 12v dc ext power external 8 ohm speakers main hor...
Page 6
Long ranger 4 lectrosonics, inc. 6 this section covers the initial adjustments to the transmitter and long ranger that must be made before the system is placed into operation. The step-by-step procedures are listed in the order in which they should be performed: 1) turn long ranger power on - the po...
Page 7
Portable wireless sound system rio rancho, nm 7 a) speak at the voice level you will be using during actual operation. B) while speaking, adjust the transmitter gain until the green mod level lamp on the long ranger control panel is lighted or flickers and the red mod level lamp blinks on the loudes...
Page 8
Long ranger 4 lectrosonics, inc. 8 mic jack the mic jack is a locking micro jack that supplies “phantom power” for electret microphones such as the lectrosonics m119, m140 lavalier and the hm142v, hm152v and hm162 headset models. Insert the microphone cord plug into the jack and rotate it clock- wis...
Page 9
Portable wireless sound system rio rancho, nm 9 battery power led h175dc controls and functions the h175dc may be used with a wide variety of microphones. The 3-pin xlr type connector on the h175dc allows the transmitter to be used with any dynamic microphone, as well as many two wire positive bias ...
Page 10
Long ranger 4 lectrosonics, inc. 10 h175dc operating instructions 1) install the microphone onto the transmitter. A. Unscrew the collar by turning it fully clockwise until it stops. B. Turn the collar two turns counter-clockwise to extend the locking tab c. Press the mic onto the xlr connector until...
Page 11
Portable wireless sound system rio rancho, nm 11 2) turn on the receiver and adjust the long ranger volume to minimum. 3) turn on the transmitter. The rf led on the re- ceiver should come on. 4) hold the microphone as you will when you will be using it. 5) while speaking, adjust the transmitter gain...
Page 12
Long ranger 4 lectrosonics, inc. 12 release swing open observe caution! Always turn the long ranger power off before plugging in or unplugging external speakers in some cases, the proper coverage of an audience requires a second speaker. The optional h300 is identical to the long ranger speaker and ...
Page 13
Portable wireless sound system rio rancho, nm 13 antenna black lead white lead black lead speaker mounting block add-on receiver battery figure 4 - add-on receiver antenna connections adding a second wireless channel to your long ranger a very popular feature of the long ranger is the ability to add...
Page 14
Long ranger 4 lectrosonics, inc. 14 if you are only using one of the two wireless systems, it is best to use the wireless system built into the long ranger and leave the add-on receiver turned off. This will prevent unwanted noise, hiss or static that could occur in the unused receiver from entering...
Page 15
Portable wireless sound system rio rancho, nm 15 connect two long rangers together using the aux in/out jacks. Aux in/out aux in/out figure 5 - connecting two long ranger systems multiple long ranger systems a unique use of the aux in/out jack is for connecting two long ranger systems together for s...
Page 16
Long ranger 4 lectrosonics, inc. 16 specifications operating frequency: 169 to 186 mhz audio power output: 33 watts, rms, into 8 ohms distortion: less than 1% amplifier freq. Response: 100 hz to 15 khz; +0, -3 db (omnibus jack input to external speaker jack output.) overall freq. Response: 200 hz to...
Page 17
Portable wireless sound system rio rancho, nm 17 accessories and replacement parts dcr15/2au battery charger replacement hm142v single headband with locking micro plug for m175 series transmitters. Hm152v double headband, adjustable, with micro plug headset microphone for m175 series transmitters. H...
Page 18
Long ranger 4 lectrosonics, inc. 18 symptom possible cause long ranger red power lamp not on or dim 1) wireless microphone volume control in off position 2) batteries completely discharged 3) battery terminals disconnected or loose long ranger green rf lamp not on 1) transmitter not on 2) dead batte...
Page 19
Portable wireless sound system rio rancho, nm 19 service and repair if your system malfunctions, you should attempt to correct or isolate the trouble before concluding that the equipment needs repair. Make sure you have followed the setup procedure and operating instructions. Check the interconnect-...
Page 20: Limited One Year Warranty
November 8, 2006 581 laser road ne • rio rancho, nm 87124 usa • www.Lectrosonics.Com (505) 892-4501 • (800) 821-1121 • fax (505) 892-6243 • sales@lectrosonics.Com limited one year warranty the equipment is warranted for one year from date of purchase against defects in materials or workmanship provi...