Q uick s tart g uide fill in for your records: serial number: purchase date: this guide is intended to assist with initial setup and operation of your lectrosonics product. For a complete instruction manual, visit and download at: www.Lectrosonics.Com/us watertight transmitter wm digital hybrid wire...
Lectrosonics, inc. 2 battery compartment caps audio input jack audio button lcd freq button modulation leds pwr led up arrow down arrow controls and functions lcd screen the display is a highly visible backlit lcd with screens for making all setup and level adjustments. The transmitter can be powere...
Www.Lectrosonics.Com 3 signal level -20 led -10 led less than -20 db off off -20 db to -10 db green off -10 db to +0 db green green +0 db to +10 db red green greater than +10 db red red audio button the audio button is used to display the gain and low frequency roll-off settings. The up and down arr...
Lectrosonics, inc. 4 battery compartments the battery compartments are a rugged, straightforward design with a recessed entry that captures the o-ring on the cap. The spring contact on the cap maintains solid contact on the battery regardless of its exact length. The o-rings should be kept clean and...
Www.Lectrosonics.Com 5 operating instructions power up and boot sequence simultaneously press and hold the audio and freq buttons until the startup count is completed. The screen will display a count from 1 to 3 as the unit boots up, then it switches to the audio screen. As the unit turns on, the mo...
Lectrosonics, inc. 6 up arrow settings with the unit turned off, hold the up arrow button and simultaneously press the audio and freq buttons. Each successive press of the audio button will step through the setup screens. • compatibility mode • input type • rf power output • lcd backlight • frequenc...
Www.Lectrosonics.Com 7 down arrow settings hold the down arrow button and simultaneously press the audio and freq buttons. Each successive press of the audio button will step through the setup screens. • remote control • auto power restore • audio mute use the up and down arrow buttons to scroll thr...
Lectrosonics, inc. 8 audio button settings low frequency roll-off it is possible that the low frequency roll-off point could affect the gain setting, so it’s generally good practice to make this adjustment before adjusting the input gain. Press and hold the audio button with lf (xx) on the screen wh...
Www.Lectrosonics.Com 9 freq button settings the frequency can be displayed either in mhz or as a two-digit hexadecimal number and it can be set when the unit is in “standby” or when the transmitter is powered up in the normal operating mode. Mhz hex code the hexadecimal numbering system is unique to...
Lectrosonics, inc. 10 re-conditioning (drying out) the caps and desiccant beads an easy way to heat the doors is to use a coffee mug warmer, which typically costs about $10. The surface temperature of about 220 degrees (f) will dry the doors and desiccant, but it will not disturb any light lubricant...
Www.Lectrosonics.Com 11 replacement o-rings model oringkit/wm includes replacement o-rings for battery caps and microphone plug with wm style connector, and petroleum jelly pouch. Separate parts: p/n 35877 o-ring; .433” id x .623” od p/n 35750 o-ring; .312” id x .437” od p/n 32408 petroleum jelly po...
Limited one year warranty the equipment is warranted for one year from date of purchase against defects in materials or workmanship provided it was purchased from an authorized dealer. This warranty does not cover equipment which has been abused or damaged by careless handling or shipping. This warr...
