Ledj FLEX30 User Manual - Ftp3Hp Rgb Led Dmx Driver
www.prolight.co.uk
FTP3HP RGB LED DMX Driver User Manual
3
To set the DMX address to “021”;
Switch dipswitches 1, 3 and 5 in
the “ON” position.
1 = 1
3 = 4
5 = 16
= 21
Product overview & technical specifications
The FTP3HP RGB LED DMX Driver is suitable for most
types of 12-24V RGB flexible colour strips requiring
constant voltage control. After connecting a RGB LED
Strip(s) with this RGB controller you can utilise the
manual dimming mode or built-in programs via the
on-board dipswitches. Further control can be facilitated
by the units DMX input. The driver can also be used for
3 channels of single colour LED tape.
• Constant voltage driver for 12-24V RGB LED
flexible colour strip
• Housed in a compact, rugged metal casing
• Phoenix type plug in terminals
• DMX and manual dimming mode plus
built-in programs
• Dipswitch mode/DMX selection
FTP3HP RGB LED DMX Driver
Specifications
FTP3HP RGB LED DMX Driver
Power supply
DC 12-24V
Maximum total output 12A
Dimensions
24.5 x 115 x 54mm
Weight
0.2kg
IP rating
IP20
Order code
FLEX30
Data –
Data +
GND
DMX INP
UT
DMX OUTP
UT
DC IN
(1
2A MAX)
Data –
Data +
GND
+ 12-24V
GND
OUTPUT
LOAD 4A P
ER CHANNEL (1
2A MAX)
RED
GREEN
BLUE
+12-24V
+12-24V
SWITCH
10 11 12
DMX MODE
DIMMING MODE
BUILT-IN MODE
DMX ADDRESS & DIMMER SETTINGS
FLEXOLED FTP3HP RGB LED DMX DRIVER
115mm
24.5mm
54mm
DMX mode:
DMX address examples:
Dipswitch
Value
1
1
2
2
3
4
4
8
5
16
6
32
7
64
8
128
9
256
In DMX mode, dipswitch 10 should be in the “ON” position. The DMX address is set by combining dipswitches
(0-9) that add up to the value required between 001-511. Please refer to the table below for more information.
1 2 3 4 5 6 7 8 9 10
12
11
1 = ON
0 = OFF
To set the DMX address to “451”;
Switch dipswitches 1, 2, 7, 8 and
9 in the “ON” position.
1 = 1
2 = 2
7 = 64
8 = 128
9 = 256
= 451
In the box: 1 x unit &
1 x user manual
01 - 3-Pin DMX input terminal
02 - 3-Pin DMX output terminal
03 - 2-Pin power in terminal
04 - Dipswitches
05 - RGB output terminals
06 - +VE output
common terminals
07 - Mounting points
Data –
Data +
GND
DMX INP
UT
DMX OUTP
UT
DC IN
(1
2A MAX)
Data –
Data +
GND
+ 12-24V
GND
OUTPUT
LOAD 4A P
ER CHANNEL (1
2A MAX)
RED
GREEN
BLUE
+12-24V
+12-24V
SWITCH
10 11 12
DMX MODE
DIMMING MODE
BUILT-IN MODE
DMX ADDRESS & DIMMER SETTINGS
FLEXOLED FTP3HP RGB LED DMX DRIVER
01
02
05
04
03
06
07
07