Summary of HEX Par 9 LEDJ226
Page 1
Order code: ledj226 hex par 9 exterior fixture user manual.
Page 2: Safety Advice
Www.Prolight.Co.Uk hex par 9 user manual 2 warning for your own safety, please read this user manual carefully before your initial start-up! • before your initial start-up, please make sure that there is no damage caused during transportation. • should there be any damage, consult your dealer and do...
Page 3: Hex Par 9 Exterior Fixture
Www.Prolight.Co.Uk hex par 9 user manual 3 product overview & technical specifications the exterior hex par 9 features 9 x 12w six-colour leds, giving smooth colour mixing from rich saturated hues to subtle pastel shades, controlled via a 4 push button led menu which allows for easy access to the mo...
Page 4: Operating Instructions
Www.Prolight.Co.Uk hex par 9 user manual 4 dmx mode: to access the dmx mode, press the “mode” button until the display shows addr and press the “enter” button. Use the “up” and “down” buttons to select the desired dmx address and then press “enter” to confirm your selection. Operating instructions i...
Page 5: Operating Instructions
Www.Prolight.Co.Uk hex par 9 user manual 5 operating instructions channel mode: to access the channel mode, press the “mode” button until the display shows chnd and press the “enter” button. Use the “up” and “down” buttons to select the desired channel mode and then press “enter” to confirm your sel...
Page 6
Www.Prolight.Co.Uk hex par 9 user manual 6 master/slave mode: to access the master/slave mode, press the mode button until the display shows slnd and press the “enter” button. Use the “up” and “down” buttons to select nast (master) or slav (slave) and then press “enter” to confirm your selection. Sh...
Page 7: Operating Instructions
Www.Prolight.Co.Uk hex par 9 user manual 7 operating instructions display on/off: to access the led display on/off mode, press the “mode” button until the display shows led and press the “enter” button. Use the “up” and “down” buttons to select on or off and then press “enter” to confirm your select...
Page 8: Dmx Setup
Www.Prolight.Co.Uk hex par 9 user manual 8 setting the dmx address: the dmx mode enables the use of a universal dmx controller. Each fixture requires a “start address” from 1- 512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start addr...
Page 9: Dmx Setup
Www.Prolight.Co.Uk hex par 9 user manual 9 notice: be sure to follow the diagrams below when making your own cables. Do not connect the cables shield conductor to the ground lug or allow the shield conductor to come in contact with the xlrs outer casing. Grounding the shield could cause a short circ...
Page 10: Weee Notice
Www.Prolight.Co.Uk hex par 9 user manual 10 weee notice correct disposal of this product (waste electrical & electronic equipment) (applicable in the european union and other european countries with separate collection systems) this marking shown on the product or its literature, indicates that it s...
Page 11
Www.Prolight.Co.Uk hex par 9 user manual 11.
Page 12
Www.Prolight.Co.Uk hex par 9 user manual 12.