Ledj Intense 9P10 RGBWA LED Slim Panel User Manual - page 5

 LEDJ Intense 9P10 RGBWA LED Slim Panel   

                                                    Operations

DMX mode:

To access the DMX mode, press the 

“MODE” button on the LED display to show “d001” on the 

LED display. Now press the 

“ENTER” button and use the “UP” and “DOWN” buttons to set the 

desired DMX address setting from 

“d001 - d512”.Once you have selected the desired DMX 

address setting, press the 

“ENTER” button to choose one of the 5, 7 or 9 DMX channel modes 

use the 

“UP” and “DOWN” buttons and press the “ENTER” button to confirm the setting.

Static colour mode

To access the static colour mode, press the 

“MODE” button on the LED display to show “Colt” on 

the LED display. To change the brightness of each colour please see below.

Red Adjustment

To adjust the brightness of the red LEDs, press the 

“MODE” button to show “r255” on the 

display. Now press use the

 “UP” and “DOWN” buttons to adjust the brightness from 000-255.

To confirm your choice, press the 

“ENTER” button.  Note: 000 = off, 255 = full on.

Green Adjustment

To adjust the brightness of the green LEDs, press the 

“MODE” button to show “9255” on the 

display. Now press use the

 “UP” and “DOWN” buttons to adjust the brightness from 000-255.

To confirm your choice, press the 

“ENTER” button. Note: 000 = off, 255 = full on.

Blue Adjustment

To adjust the brightness of the blue LEDs, press the 

“MODE” button to show “b255” on the 

display. Now press use the

 “UP” and “DOWN” buttons to adjust the brightness from 000-255.

To confirm your choice, press the 

“ENTER” button. Note: 000 = off, 255 = full on.

White Adjustment

To adjust the brightness of the green LEDs, press the 

“MODE” button to show “u255” on the 

display. Now press use the

 “UP” and “DOWN” buttons to adjust the brightness from 000-255.

To confirm your choice, press the 

“ENTER” button. Note: 000 = off, 255 = full on.

Amber Adjustment

To adjust the brightness of the blue LEDs, press the 

“MODE” button to show “A255” on the 

display. Now press use the

 “UP” and “DOWN” buttons to adjust the brightness from 000-255.

To confirm your choice, press the 

“ENTER” button. Note: 000 = off, 255 = full on.