Summary of LEDJ01
Page 1
Www.Prolight.Co.Uk colour burst order code: ledj01 user manual.
Page 2
Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - fol...
Page 3
Important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections wit...
Page 4
Introduction control features • 4-channel dmx-512 led can • blackout/dimmer/strobe/sound activation • individual control of red, green and blue led’s features • 84 leds: - 27 red, 27 green, 30 blue • ultra bright 5mm led’s • rgb colour mixing • built-in colour change programmes • power consumption: ...
Page 5
Product overview setup operating instructions the colour burst is a dmx-512 controllable, full rgb colour mixing par can made up of high effi ciency and super bright led’s. There are three colour groups (red, blue and green) whose intensity can be controlled individually allowing the creation of an ...
Page 6
Master/slave the master/slave mode will allow you to link up as many units as you want in a daisy chain fashion. In this mode, the first unit in the daisy chain will control the following units. 1) connect all units in a daisy chain as described in the section following. 2) for master unit in auto m...
Page 7
Manual control options colour selection • with dip switch 1 only set to on you obtain static red • with dip switch 2 only set to on you obtain static green • with dip switch 3 only set to on you obtain static blue you can have any combination of switches 1,2,3 to obtain static colour mix. Flashing m...
Page 8: Address 10
Dmx control mode set the start address using the group of dip switches located usually on the back of the fixture. Each dip switch has an associated value. Adding the value of each switch in the on position will provide the start address. Determining which switches to toggle on given a specific star...
Page 9
Dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixture. Dmx data is sent as serial data that travels from fixture to fixture via the data ...
Page 10
Notice: • be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: lin...
Page 11: Dip Switch Position
Dmx dip switch quick reference chart dip switch position.
Page 12
Dmx channel values technical specifications weight & dimensions • length…...........................................................125mm • width................................................................125mm • height……………………………………………..200mm • weight………………………………………........1.5kgs power • ac inp...