Ledj LEDJ108 User Manual - page 5
STAGE COLOR 24 TRI
OPERATION MODES
Operation modes
Sound Active mode:
To activate the unit in sound active mode, press the
“MODE” button to show “SOUND MODE”
on the LCD screen. Now press the
“ENTER” button to select the desired sensitivity level by using
the
“UP” and “DOWN” buttons. Press the “ENTER” button again to select the frequency level
and adjust by using the
“UP” and “DOWN” buttons.
“SENS” 00 - 31 (00 = low, 31 = high)
“FQN” 01-99 (01 = low, 99 = high)
Auto run mode:
To activate the unit in auto run mode, press the
“MODE” button to show “AUTO RUN” on the
LCD screen. Now press the
“ENTER” button to select the desired frequency level by using the
“UP” and “DOWN” buttons.
“FQN” 01-99 (01 = low, 99 = high)
Note: In this mode, it will run 13 built-in programmes in a continuos loop.
Slave mode:
To activate the unit in slave mode, first you must link multiple units together and press the
“MODE” button to show “SLAVE MODE” on the LCD screen. Now on the master unit press the
“MODE” button to select the desired mode and the slave units will now run in sequence with the
master unit.
Built-in programmes:
To activate the units built-in programmes, press the
“MODE” button to show “01.STATIC” on the
LCD screen. Press the
“ENTER” button to choose between the 14 built-in programmes by
using the
“UP” and “DOWN” buttons. Now press the “ENTER” button to select the desired speed
and adjust by using the
“UP” and “DOWN” buttons. Press the “ENTER” button once more to
select the desired flash value and adjust by using the
“UP” and “DOWN” buttons.
Speed values: 00 - 99 (00 = slow, 99 = fast)
Flash values: 00 - 99 (00 = slow, 99 = fast)
For the 14 built-in programmes please see page 5.
DMX mode:
To activate the unit in DMX mode, press the
“MODE” button to show “DMX MODE” on the LCD
screen. Press the
“ENTER” button and select the desired DMX address setting by using the “UP”
and
“DOWN” buttons. Then to select one of the 5 DMX modes 21, 18, 12, 9 or 6 channel,
press the
“ENTER” button again to choose the desired DMX mode by using the “UP” and
“DOWN” buttons.
For the 21, 18, 12, 9 and 6 channel DMX charts please see pages 6 & 7.
NOTE: Once the desired settings have been selected in each of the above modes,
ALWAYS
confirm the settings by pressing the
“ENTER” button.
4.