Ledj LEDJ163 User Manual

Manual is about: PF 35 Profile Spot

Summary of LEDJ163

  • Page 1

    Order codes: ledj163 - cw black housing ledj163a - cw white housing ledj164 - ww black housing ledj164a - ww white housing pf 35 profile spot user manual.

  • Page 2: Safety Advice

    Www.Prolight.Co.Uk pf 35 profile spot user manual 2 safety advice warning for your own safety, please read this user manual carefully before your initial start-up! • before your initial start-up, please make sure that there is no damage caused during transportation. • should there be any damage, con...

  • Page 3: Pf 35 Profile Spot

    Www.Prolight.Co.Uk pf 35 profile spot user manual 3 product overview & technical specifications the pf 35 profile spot is a mini profile powered by a high output 35w led and uses a high quality optical system for sharp and precise projection. The beam angle can be manually focused and also adjusted ...

  • Page 4: Technical Specifications

    Www.Prolight.Co.Uk pf 35 profile spot user manual 4 technical specifications 01 - earth point 02 - lcd display 03 - function buttons 04 - ir remote sensor 05 - colour frame release mechanism 06 - framing shutters 07 - gobo slot 08 - zoom adjustment 09 - focus adjustment 10 - 3-pin dmx input 11 - 3-p...

  • Page 5: Operating Instructions

    Www.Prolight.Co.Uk pf 35 profile spot user manual 5 operating instructions menu slave mode slave mode dmx mode addr:001 dmx address setting dmx mode addr:001 dmx mode chan: 01 dmx mode delay:01 dmx mode addr:512 dmx mode chan: 02 dmx mode chan: 03 dmx mode delay:04 fade in/out mode fade run speed:09...

  • Page 6: Operating Instructions

    Www.Prolight.Co.Uk pf 35 profile spot user manual 6 dmx mode: operating in a dmx control mode environment gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independen...

  • Page 7: Operating Instructions

    Www.Prolight.Co.Uk pf 35 profile spot user manual 7 operating instructions manual dimming mode: to access the manual dimming mode press the “menu” button until the display shows “manual whie” on the lcd display. Use the “up” and “down” buttons to select the required brightness from “000” ~ “255”. Pr...

  • Page 8: Operating Instructions

    Www.Prolight.Co.Uk pf 35 profile spot user manual 8 operating instructions + – 0 sl s f d a cw 2 1 3 5 4 6 8 7 9 dimming flash dmx mode auto run blackout slave set addr 01 04 08 05 09 07 02 08 03 06 ir remote functions: 01 - sets the unit into blackout off/on (led on/off). 02 - runs the fade in/out ...

  • Page 9: Dmx Setup

    Www.Prolight.Co.Uk pf 35 profile spot user manual 9 setting the dmx address: the dmx mode enables the use of a universal dmx controller. Each fixture requires a “start address” from 1- 511. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the s...

  • Page 10: Dmx Setup

    Www.Prolight.Co.Uk pf 35 profile spot user manual 10 notice: be sure to follow the diagrams below when making your own cables. Do not connect the cables shield conductor to the ground lug or allow the shield conductor to come in contact with the xlrs outer casing. Grounding the shield could cause a ...

  • Page 11: Weee Notice

    Www.Prolight.Co.Uk pf 35 profile spot user manual 11 weee notice correct disposal of this product (waste electrical & electronic equipment) (applicable in the european union and other european countries with separate collection systems) this marking shown on the product or its literature, indicates ...

  • Page 12

    Www.Prolight.Co.Uk pf 35 profile spot user manual 12.