Summary of LEDJ266
Page 1
Order code: ledj266 vector beam quad user manual.
Page 2: Safety Advice
Www.Prolight.Co.Uk vector beam quad user manual 2 safety advice warning for your own safety, please read this user manual carefully before your initial start-up! • before your initial start-up, please make sure that there is no damage caused during transportation. • should there be any damage, consu...
Page 3: Vector Beam Quad
Www.Prolight.Co.Uk vector beam quad user manual 3 product overview & technical specifications the vector beam quad is a dynamic multi-beam batten effect featuring two sweeping led bars, each loaded with four individually controllable narrow beams. Dispensing eight intense and sharp long-throw beams ...
Page 4: Technical Specifications
Www.Prolight.Co.Uk vector beam quad user manual 4 technical specifications 01 - lcd display 02 - menu button 03 - enter button 04 - up button 05 - down button 06 - 3-pin dmx in socket 07 - 5-pin dmx in socket 08 - powercon in socket 09 - fuse f2a 250v 10 - on/off switch 11 - earth point 12 - powerco...
Page 5: Operating Instructions
Www.Prolight.Co.Uk vector beam quad user manual 5 operating instructions dmx channel mode: operating in a dmx control mode environment gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixtur...
Page 6: Operating Instructions
Www.Prolight.Co.Uk vector beam quad user manual 6 operating instructions channel value function 1 000-180 left bar 0-180° tilt 181-255 left bar is static at 180° 2 000-255 left bar tilt speed (000: fast, 255: slow) 3 000-255 right bar tilt 0-180° 000-255 right bar is static at 180° 4 000-255 right b...
Page 7: Operating Instructions
Www.Prolight.Co.Uk vector beam quad user manual 7 operating instructions channel value function 1 000-180 left bar 0-180° tilt 181-255 left bar is static at 180° 2 000-255 left bar tilt speed (000: fast, 255: slow) 3 000-255 right bar 0-180° tilt 000-255 right bar is static at 180° 4 000-255 right b...
Page 8: Operating Instructions
Www.Prolight.Co.Uk vector beam quad user manual 8 operating instructions led: press “enter” to go into the led settings. Within this the user can either choose “e-auto” or “e-manul”. “e-auto” - press the “enter” button for a menu to adjust the speed and frequency. “speed” - press the “enter” button ...
Page 9: Dmx Setup
Www.Prolight.Co.Uk vector beam quad user manual 9 setting the dmx address: the dmx mode enables the use of a universal dmx controller. Each fixture requires a “start address” from 1- 511. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the sta...
Page 10: Dmx Setup
Www.Prolight.Co.Uk vector beam quad user manual 10 notice: be sure to follow the diagrams below when making your own cables. Do not connect the cables shield conductor to the ground lug or allow the shield conductor to come in contact with the xlrs outer casing. Grounding the shield could cause a sh...
Page 11: Weee Notice
Www.Prolight.Co.Uk vector beam quad user manual 11 weee notice correct disposal of this product (waste electrical & electronic equipment) (applicable in the european union and other european countries with separate collection systems) this marking shown on the product or its literature, indicates th...
Page 12
Www.Prolight.Co.Uk vector beam quad user manual 12.