Ledj LEDJ456 User Manual - Technical Specifications
www.prolight.co.uk
Display Qube User Manual
4
Technical specifications
01 - Qube input
02 - On/off power switch
03 - PowerCON input
04 - PowerCON output
05 - RJ45 signal input
06 - RJ45 signal output
07 - Fuse: F3A 250V
08 - 1m safety wire
09 - Captive power connection
10 - Safety eye
Each set of 2 Display Qubes are supplied with:
2 x Display Qubes,
2 x power supplies,
1 x 13A PowerCON cable,
1 x PowerCON link cable,
2 x 1m safety wires,
2 x omega clamps
& 1 x user manual
Subsequent extra Qubes will be supplied with:
1 x Display Qube,
1 x power supply,
1 x PowerCON link cable,
1 x 1m safety wire,
& 1 x omega clamp
QUBE INPUT
SAFTEY EYE
www.prolight.co.uk
DISPLAY QUBE
POWER INPUT:
100-240V~50/60Hz
SIGNAL INPUT
FUSE: F3A 250V
ON
OFF
SIGNAL OUTPUT
POWER OUTPUT:
100-240V~50/60Hz
07
02
04
10
10
10
01
05
06
03
10
08
10
09
Attention: SD-1 Controller (Order code: LEDJ462) and Display Qube CANNOT be switched on at the same time,
as this will damage the files on the SD card. Always switch the SD controller on first.