Ledj LEDJ66 User Manual

Summary of LEDJ66

  • Page 1

    Www.Prolight.Co.Uk (order code: ledj66) user manual stratos.

  • Page 2

    Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - fol...

  • Page 3

    Stratos uv safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and all mains volta...

  • Page 4

    Stratos uv introduction introduction control features • 2-channel dmx-strobe • blackout/dimmer/strobe features • 336 ultra bright 10mm ultra violet led’s • sound control via internal microphone • master/slave functions • sound activated • rugged compact housing • consumption: 30w • beam 40 degrees •...

  • Page 5

    Stratos uv overview product overview setup operating instructions the stratos uv is a dmx-512 controllable, unit made up of high efficiency and super bright led’s. The stratos uv will operate in stand-alone, master/slave, sound activated or via dmx-512 control..

  • Page 6

    Stratos uv master/slave master/slave the master/slave mode will allow you to link up as many units as you want in a daisy chain fashion. In this mode, the first unit in the daisy chain will control the following units. 1) connect all units in a daisy chain as described in the section following. 2) f...

  • Page 7

    Stratos uv control options manual control options dimmer • with dip switch 1 only set to on you obtain 25% output • with dip switch 2 only set to on you obtain 50% output • with dip switches 1, 2 and 3 only set to on you obtain 75% output • with dip switches 1, 2, 3 and 4 only set to on you obtain 1...

  • Page 8: Address 10

    Stratos uv control options set the start address using the group of dip switches located usually on the back of the fixture. Each dipswitch has an associated value. Adding the value of each switch in the on position will provide the start address. Determining which switches to toggle on given a spec...

  • Page 9

    Stratos uv dmx set up dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixture. Dmx data is sent as serial data that travels from fixture to...

  • Page 10

    Notice: • be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: lin...

  • Page 11

    Stratos uv dip switch reference chart dmx dip switch quick reference chart dip switch position.

  • Page 12

    Stratos uv dmx values technical specifications weight & dimensions • length…...........................................................382mm • width................................................................105mm • height……………………………………………..215mm • weight……………………………………….........2.5kgs power • ac...