Order code: ledj161 user manual.
Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - fol...
Important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections wit...
Introduction control features • dmx channels: 3/6 selectable • blackout/dimmer/strobe/sound activation • individual control of red, green and blue leds • optional dmx controllers: ledj s-1 (ledj126), ledj s-1f foot controller (ledj127) features • 12 x 1w leds (r: 4, g: 4, b: 4) • rgb colour mixing •...
Mini bar tc operations.
Note: for full function of the s-1 controller, please set the unit into the 3 channel dmx mode. Note: when using the s-1f foot switch controller please make sure that the unit is set into 3 channel dmx mode. Note: when the unit is being used in the 6 channel dmx mode, only the corresponding dmx slid...
Dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixture. Dmx data is sent as serial data that travels from fixture to fixture via the data ...
Notice: • be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: lin...
