Ledj RGB DMX User Manual

Manual is about: 2.1M x 1M Starcloth Deck Skirt

Summary of RGB DMX

  • Page 1

    Www.Prolight.Co.Uk rgb dmx deck skirt 2.1m x 1m starcloth (order code: star25) user manual.

  • Page 2

    Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - fol...

  • Page 3

    Ledj rgb dmx deck skirt safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and al...

  • Page 4

    Operating modes: 1, stand alone with sound activation 2, dmx operation for sound activation: with the power turned off set dip switch 10 to on and all others to off. Turn on the power and the sensitivity control can now be set to the desired level. For dmx operation: with the power turned off set di...

  • Page 5

    Side view: ledj rgb dmx deck skirt technical specifications 240-249 250-255 0-255 channel dmx number function pattern number 24 auto run through all programmes animates the pattern selected on channel 1 (the higher the number the faster the speed) channel 1 (continued) channel 2 back view: identfica...

  • Page 6

    Dmx control mode operating in a dmx control mode environment gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independently. Setting the dmx address the dmx mode ena...

  • Page 7

    Dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixture. Dmx data is sent as serial data that travels from fixture to fixture via the data ...

  • Page 8

    Notice: • be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: lin...

  • Page 9

    Ledj rgb dmx deck skirt dip switch reference chart dmx dip switch quick reference chart dip switch position.

  • Page 10

    Maintenance the rgb dmx deck skirt requires almost no maintenance. However, you should keep the unit clean, otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. The cloth will requ...