Ledj Slimline CW Series User Manual - Operating Instructions
www.prolight.co.uk
Slimline CW & WW COB Series User Manual
5
Operating instructions
DMX channel mode:
Operating in a DMX control mode environment gives the user the greatest flexibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of the
fixture and each fixture independently.
To access the DMX channel mode, press the “MODE” button on the rear of the unit to show
A001
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
desired DMX address. Now press the “ENTER” button to choose one of the 1 or 2 DMX channel modes
use the “UP” and “DOWN” buttons, and press the “ENTER” button to confirm the setting.
To exit out of any of the above options, press the “MODE” button.
Dimming mode:
To access the dimming mode, press the “MODE” button on the rear of the unit to show
C000
on the
LCD display. Then press the “MODE” to set the desired brightness. Now press “ENTER” until the display
shows
F--O
on the LED display and use the “UP” and “DOWN” buttons to set the strobe speed.
Value: 0 - 9 (0 = Off, 9 = Fast)
To exit out of any of the above options, press the “MODE” button.
Master/slave mode:
To set the master unit, press the “MODE” button on the rear of the master unit then select your
desired program (sound active, auto, static colour, colour mix or one of the built-in programs).
To set the other units in slave mode, press the “MODE” button on the rear of the unit to show
SLAU
on the LED display and press the “ENTER” button to confirm the setting. The unit will now run in
sequence with the master unit.
To exit out of any of the above options, press the “MODE” button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.
Sound active mode:
To access the sound active mode, press the “MODE” button on the rear of the unit to show
SU00
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
sound sensitivity level from
SU.00
~
SU.99
and press the “ENTER” button to confirm the setting.
Value: 00 - 99 (00 = low, 99 = high)
To exit out of any of the above options, press the “MODE” button.
Channel Value
Function
1
0-255
0-100% dimming
1 channel mode:
Channel Value
Function
1
0-255
0-100% master dimmer
2
0
No function
1-255
Variable strobe (slow-fast)
2 channel mode: