Ledj SPECTRA BATTEN12T3 EXTERIOR User Manual - page 6

5.

DMX Mode

To activate the units DMX mode, press and hold the 

“M” button for 2 seconds to show “0.01” on 

the LED screen and use the 

“UP” and “DOWN” buttons to set the first digit in the DMX address 

from 0 to 9. To set the second digit of the DMX address, tap the 

“M” button and use the “UP” and 

“DOWN” buttons to select the desired number form 0 to 9. Now to set the final digit of the DMX 

address tap the 

“M” button again and use the “UP” and “DOWN” buttons to select the desired 

number 0 to 5.

To choose one of the two DMX channels, tap the “M” button and use the “UP” and “DOWN” 

buttons to scroll the through the 1, 3, 3, 4 or 5 channel options.

dP.1 = 1 channel mode, dP.2 = 3 channel mode RGB, dP.3 = 3 channel mode Function, 

dP.4 = 4 channel mode, dP.5 = 5 channel mode

To confirm your choice, pres the 

“M” button.

For DMX functions, please see the DMX charts below and overleaf.

Master/salve mode:

To set the unit as the master, simply use any of the function modes on the unit.

To set the unit as a slave unit(s), press the 

“M” button to show “SLA” on the LED display. 

The unit will follow in sequence with the master unit.

DMX Charts:

1 channel mode DMX chart:

 Spectra Batten 12T3 Exterior 

                                                    DMX Programme Charts

Channel

1

Value

0

1-22

23-45

46-68

69-91

92-114

115-137

138-160

161-183

184-206

207-229

230-252

253-255

Function

No function

Red

Green

Blue

Cyan

Yellow

Orange

Pink

Purple

Dark Blue

Pale Green

White

Warm White