W w w . P r o l i g h t . C o . U k stage wash 18 order code: ledj101 user manual.
Warning for your own safety, please read this user manual carefully before your initial start-up! Caution! Keep this equipment away from rain, moisture and liquids. Safety instructions every person involved with the installation, operation & maintenance of this equipment should: - be competent - fol...
Stage wash 18 safety important: the manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • never let the power-cable come into contact with other cables. Handle the power-cable and all mains vo...
Stage wash 18 technical specifications introduction control features • dmx channels: 3 & 6 selectable • blackout/dimmer/strobe • individual control of red, green and blue leds product overview setup operating instructions the stage wash 18 is a dmx-512 controllable, full rgb colour mixing wash made ...
Operation: there are 7 different operation modes to choose from: 1) static colour mode 3) colour fade mode 5) sound active mode 7) dmx modes 2) colour change mode 4) auto run mode 6) master/slave mode 1, static colour mode mode button - by pressing the “mode” button under the led display, the led di...
Stage wash 18 operation dmx value/function 3 channel dmx chart 6 channel dmx chart detailed instructions for 6 channel dmx mode. 1). When using channel 1, 2 and 3, for colour mixing you can use channel 5 for the strobe effect. 2). When channel 6 is set to 0-31 and channel 5 is set to 0, you can then...
Dmx-512: • dmx (digital multiplex) is a universal protocol used as a form of communication between intelligent fixtures and controllers. A dmx controller sends dmx data instructions form the controller to the fixture. Dmx data is sent as serial data that travels from fixture to fixture via the data ...
Notice: • be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the xlr’s outer casing. Grounding the shield could cause a short circuit and erratic behaviour. Special note: lin...
