LEEDS WORLD 1670-82 Start Manual

Desktop Digital Photo Frame Start Guide

1670-82

Before Using, Charge the Photo Frame 

This digital photo frame has a built-in battery.

Plug the USB power cord into a PC and into the 

frame.

The digital photo frame will begin to charge. 

It takes about two hours to fully charge the 

battery, which should provide 

three hours of play time. 

NOTE: Completely charge 

the battery before use.

Do not let the frame stay 

connected to a power 

source for more than 12 

hours or it may overheat. 

To get the longest life from 

the battery, it should be 

completely emptied and 

fully charged for the first 

three charge cycles.

Contents:

Connect the Display Stand:

BACK VIEW

Controls and Connections:

2

Install Disc

3

Photo Frame

4

USB Power Cord

1

User Manual

Charge the Leed’s Photo Frame

Previous

Next

Mini-USB Jack 

For transferring images 

and powering the frame

Reset

Insert a straightened paper clip 

if frame becomes unresponsive

Mode

Hold for three seconds to turn on 

or off, click quickly to turn on/off 

auto play of pictures

The Leed’s Pocket digital photo frame comes with a stand 

that can be used to orient the frame in either the portrait 

or landscape orientation.

The stand is kept under the 

front panel in the screen. To 

access it, press the tab in and 

release the LCD from the front 

panel.

Press where indicated to pop up the stand, 

and remove it from the LCD.

Place the front panel 

back in place.  

In the back of the LCD, 

screw the stand into 

one of the slots.

©2009 LEEDSWORLD

Proprietary information contained in this document is the sole property of Leedsworld.   

Any reproduction in part or as a whole without written permission of Leedsworld is prohibited.

Rear view, 

stand installed.

La

nd

sca

pe

Po

rt

ra

it