LEEDS WORLD HIZ PRE User Manual - page 13
OPERATION____________________
3.8
Mounting Instructions
The HiZ Pre can be rack mounted, or operated as a stand-
alone unit.
Stand-alone Use: The HiZ Pre comes with (4) rubber shock
mount vibration dampers or “feet”. Please attach the rubber
feet to the bottom side of the HiZ Pre when using in a stand-
alone configuration.
Rack Mount Use: A rack mount kit is available from
authorized distributors.
The kit includes:
1. 1 Each, 2U Rack Mount plate (holds two HiZ Pre units)
2. 5 Each: Mounting screws
3. 4 Each: Rack nut clips, screws, and washers
Use the kit to mount the HiZ Pre into a studio rack or travel
case.
3.9
Interference
Care must be taken when operating the HiZ Pre in
environments susceptible to radio or magnetic interference.
Using the HiZ Pre in close proximity to computer CPU’s, power
supplies, or other electrical devices may introduce undesired
audio artifacts such as buzzing or hum into the output signal of
the HiZ Pre. Please operate the HiZ Pre to insure no electrical
interference occurs.
__________________
______________________
12