Leema-acoustics AGENA Handbook - page 6
6
VERY IMPORTANT
Before connecting your new Leema Agena to the rest of your system, please ensure all
required input/output cables are connected
BEFORE
inserting the mains power lead and
powering for the first time.
User installation and safety advice
Please ensure that the mains voltage of your new Libra Agena is correct for your region.
The setting is displayed on a label above the mains power inlet.
The mains voltage setting is not user adjustable, therefore the Agena must be returned to
the manufacturer if any changes are required.
Ensure the mains supply is switched off at the wall socket, or unplugged before installing
or moving the Agena.
Do not use near water, for example do not place a potted plant on top of the unit or allow
drinks to be placed near the unit. If liquid is spilt in to the cabinet, remove the mains lead
from the wall immediately.
The Agena should then be returned to your dealer for safety testing before re-use.
Failure to do so may result in electric shock or even fire!
Do not use the Agena in damp conditions, e.g. outside of the house.
Keep away from direct sunlight and other heat sources and ensure adequate ventilation
around the Agena to maintain proper cooling. Units MUST NOT be stacked directly on top
of each other.
Never attempt to open the cabinet. There are no user adjustable parts inside and doing so
will invalidate the product warranty.
In the event of an electrical storm, remove the mains power lead from the wall outlet.