Leema-acoustics Monoblock Power Amp Handbook - page 5
VERY IMPORTANT
Before connecting your new Leema amplifier to the rest of your system, please ensure that the loudspeaker
cables are correctly and firmly attached to the 4mm banana sockets on the rear of the unit. All required
sources should also be connected BEFORE inserting the mains power lead and powering for the first time.
Although the amplifier has short-circuit protection, shorts should be avoided to reduce the stress on the
amplifier.
User installation and safety advice
Please ensure that the mains voltage of your new amplifier is correct for your region. The setting is displayed
on a label above the mains power inlet. The mains voltage setting is not user adjustable, therefore the
amplifier must be returned to the manufacturer if any changes are required.
Ensure the mains supply is switched off at the wall socket, or unplugged before installing or moving the
amplifier.
Do not use near water, for example do not place a potted plant on top of the unit or allow drinks to be placed
near the unit. If liquid is spilt in to the cabinet, remove the mains lead from the wall immediately. The amplifier
should then be returned to your dealer for safety testing before re-use. Failure to do so may result in electric
shock or even fire! Do not use the amplifier in damp conditions, e.g. outside of the house.
Keep away from direct sunlight and other heat sources and ensure adequate ventilation around the amplifier
to maintain proper cooling. Units MUST NOT be stacked directly on top of each other.
Never attempt to open the cabinet. There are no user adjustable parts inside and doing so will invalidate the
amplifier’s warranty.
In the event of an electrical storm, remove the mains power lead from the wall outlet.
Overview
As with all high-powered amplifiers, high voltages can occur at the loudspeaker sockets. Connection should
only be carried out with the unit switched off. Neither of the Black negative connectors are Earth. 4 mm
banana type plugs must be used.
Elements Stereo / Monoblock Power Amp overview
The Leema Elements Power Amplifier is a high power output, microprocessor controlled, stereo and
monoblock amplifier. It is capable of class-leading performance at the heart of an audiophile stereo system,
but thanks to the LIPS (Leema intelligent protocol system) interface, it can also be part of a stunning home
cinema or surround music system. Each component in the system dynamically configures in real time
depending on the requirements of each input source. The microprocessor gives an unprecedented degree of
sophistication, making Leema products easy to use for all the family.
Environmental Issues
Leema operates a 100% recycling program. All waste materials generated as part of the manufacturing
process are recycled via a licensed specialist company. The power drain from all Leema electronics, in
standby or power off modes, has been optimised to a negligible level. All Leema amplifiers have been
designed to attain full operational specifications and sound quality within a few minutes of switch-on.
Made in the UK
Leema electronics are designed and manufactured in the UK.
Contact Us
Leema may be contacted via our website: www.leema-acoustics.com or by telephone: +44 (0)1938-559021
5