Legacy LCD75DFX Instruction Manual

Summary of LCD75DFX

  • Page 1

    Specification general supply voltage dc 13.8v. Negative ground current consumption max.7a power output 40w x 4. Unit dimensions 178[w] x 50[h] x 165[d] mm. Fm section frequency range 87.5mhz -107.9mhz (usa) 87.5mhz -108.0mhz (eur) effective sensitivity 3uv. I.F frequency 10.7mhz. Am section frequenc...

  • Page 2

    Dear customer: thank you for your purchase and confidence in all kinds of audio-visual products of ours. Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement your eq...

  • Page 3

    9 2 basic operating of functional keys 1. Open button press the open button to fold down the front control panel. Then a cd can be inserted into the cd slot or ejected by pressing the eject button. 2. Release button to remove the front control panel from the main body, poke at the rel button downwar...

  • Page 4

    3 8 seek 1/ 2 (only available during radio operation) seek function with the or button during radio operation. You can select seek 1/ seek 2 by using the +/- button. Seek 1: keep the or buttons pressed down and the radio will stop at the next station that is detected. Seek 2: as long as the or butto...

  • Page 5

    7 4 b) during cd mode: press the top button briefly to interrupt the playback of the cd. Press again to resume normal playback of the cd. Press the top button and hold for approximately 2 seconds to play the first track of the current disc. Press the int button to play the first 10 seconds part of e...

  • Page 6

    5 6 replace the battery of remote control: 1.Remove the battery holder as the direction indicated by the arrow. 2.Replace the battery, set a new battery properly with (+) side up. 3.Insert the battery holder. Push in the holder to the original position. Battery information: designated battery: cr202...