Legacy Skyline Owner's Manual - Unpacking
2
Unpacking
Your new speaker system has been very carefully packaged to
insure that it travels to you safely. Each speaker is protected by a
double-wall outer carton with heavy V-board corner protectors.
Molded foam end caps are used to protect the elegant cabinetry,
and a plastic liner is provided as waterproofing.
Please save this packing for future transportation. If cartons
become damaged or misplaced, new ones can be purchased from
Legacy Audio.
Connections
At the top end of your Skyline you will find a terminal plate
housing one pair of five-way binding posts.
Connect the output of the rear channel amplifier to the
loudspeaker via the gold five-way binding posts provided. Dual
banana plugs or gold spade lugs are recommended means of
termination.
Be sure that you observe polarity when making the
connections. The positive (+) terminal (red) of the amplifier
should be connected to the positive terminal of the loudspeaker.
The negative (-) terminal (black) of the amplifier should be
connected to the negative terminal of the loudspeaker.